An amazing off-road robot with 4-wheel drive.

ObdiiUartMkrShield is a socket board for Arduino MKR board to talk with vehicles through ODB-II interface.

DIY Arduino hot air SMD rework station.

This device measures fine dust and NO2 concentration in the air while on the move and adds GPS coordinates to each measurement location.

This is smart dustbin using an Arduino Uno, an ultrasonic sensor and a servo motor.

Another type of clock, which needs a bit of thinking, before you can read it...

Publish your Arduino input in real-time so it can be accessible on the internet without taking care of server side.

Use the OmniPreSense RADAR and an Arduino to read surrounding speeds and even make part of flux capacitor replica!

A laser-cut robot kitten that runs and learns from you.

An Arduino controlled glowing orb LED lamp with IR remote control.

Building a Son, first Arduino project and reconnecting with a joy lost to time.

Upon scanning the right tag and entering right pass, it will open door and send confirmation message otherwise it will send alert message.

Graph any data on your own 3D bar chart in seconds. Just edit two variables and personalise the colours.

Moves chess pieces around the board invisibly and seemingly magically.

Did you ever get into a situation where you had to wire up two, three or more I2C sensors to your Arduino just to realize the limitation?

Small temperature/humidity/atmospheric pressure monitor using Sigfox to transfer the data. Powered by solar energy to monitor beehives.

How to build an humidity and temperature meter with time display from an old voltage meter casing.

Improved serial debugging, with debug levels and simple software debugger, to see/change global variables, add watch, or call a function.

This is my first Arduino-based, Bluetooth-controlled RC car.

Supersede your old desk lamp with a new one controlled by an RFID tag or card and personalize it with an RGB color pattern to turn it off.

Chunchunmaru is an Arduino UNO based robot which can carry heavy LOAD (100kg-200kg) from one location to another.

Manage the time a device remains activated (lights on) when no presence is detected.

We will try to make a simple CNC machine with you.

The lightmeter based on Arduino as a main controller and BH1750 as a metering cell. Information is displayed on SSD1306 OLED display.