Jacket for Visually Impaired

Jacket for Visually Impaired © LGPL

Design of assistance to the visually impaired with removable prototype to be used in any clothes and powered by the cell phone.

  • 1,234 views
  • 8 comments
  • 21 respects

Components and supplies

Necessary tools and machines

09507 01
Soldering iron (generic)
4966285
Solder Wire, Lead Free

Apps and online services

About this project

Visual deficiency is characterized by the limitation or loss of the basic functions of the eye and visual system. The visually impaired may be the blind or low vision person.

To help people with this deficiency we study and every day we develop something to assist our brothers, this time we made a prototype that can be fixed on any clothing and will serve as a friend, warning the handicapped of objects in front of him, with that the user is not limited to just a single outfit with this technology.

To run this project we use the Arduino Lilypad board, with a little creativity and an easy and affordable programming the project worked and we are here posting to share the solution to the Arduino community.

Click on the link below then you will see the project in operation:

Watch the project working by clicking here.

Code

Jacket with Arduino LilypadArduino
The design has an ultrasonic sensor to measure the distance of the obstacles and the wearer will be alerted by a buzzer where the frequency of the sound varies according to the proximity of the obstacle.
/*
 * JACKETA PARA DEFICIENTE VISUAL
 * INICIO: 17/05/2019 AS 17:40
 * LTIMA ATUALIZAO:
 * PREVISO DE TRMINO: 24/05/2019
 * DETECTAR OBJETOS A FRENTE DO DEFICIENTE
 * SENSOR: ULTRASSONICO
 * ALERTA: BUZZER
 *      BIP A CADA 1S 2 METROS
 *      BIP A CADA 0,5S 1-2 METROS
 *      BIP EM ALTA FREQUENCIA COM DISTANCIA <0,5 METROS
 */

#include <Ultrassonico.h>
#define Echo 10
#define Trigger 11
#define buzzer 3

Ultrassonico  ultra(Echo, Trigger); //Echo, Trigger

void setup(){
  Serial.begin(9600);
  pinMode(4,OUTPUT);
  pinMode(5,OUTPUT);
  pinMode(buzzer,OUTPUT);
}
void loop() {
  uint16_t cm=ultra.centimetrosUltra();
  Serial.println(cm);
  if ((cm>80)and(cm<130))
  {
    tone(buzzer,3000);
    digitalWrite(4,LOW);
    digitalWrite(5,LOW);
    delay(500);
    noTone(buzzer);
    delay(500);
  }
  if ((cm>30)and (cm<50))
  {
    tone(buzzer,2000);
    digitalWrite(4,HIGH);
    digitalWrite(5,LOW);
    delay(100);
    noTone(buzzer);
    delay(100);
  }
  if (cm<30)
  {
    tone(buzzer,1000);
    digitalWrite(4,LOW);
    digitalWrite(5,HIGH);
    delay(30);
    noTone(buzzer);
    delay(30);
  }
  delay(50);
}

Schematics

Jacket for visually impaired
jacketa_para_cego_L8dW9VdT2V.fzz
Wiring diagram
we chose to use lilypad for its low energy consumption
Circuito disn2sorux

Comments

Similar projects you might like

Vision: A Torch For The Visually Impaired

Project tutorial by Saiyam Agrawal

  • 3,682 views
  • 1 comment
  • 8 respects

Otto DIY+ Arduino Bluetooth Robot Easy to 3D Print

Project tutorial by Team Otto builders

  • 60,563 views
  • 123 comments
  • 190 respects

Third Eye for The Blind

Project tutorial by Muhammed Azhar

  • 52,856 views
  • 36 comments
  • 121 respects

Tito - Arduino UNO 3D-printed robot

Project tutorial by Camilo Parra Palacio

  • 14,159 views
  • 13 comments
  • 43 respects

Probability | Autonomous Rover

Project in progress by

  • 10,853 views
  • 19 comments
  • 58 respects

Industrial Line Follower for Supplying Materials

Project tutorial by Nikodem Bartnik

  • 4,249 views
  • 1 comment
  • 13 respects
Add projectSign up / Login