Arduino Controlled LED Multi-Player Game on Arduino "Shield"

A custom made PCB fits onto an Arduino Uno. This is a game that can be played by two players.

Jan 23, 2019

•

7855 views

•

6 respects

game

shield

led

Components and supplies

Custom PCB

Resistor 10k ohm

Pushbutton switch 12mm

Male-Header 36 Position 1 Row- Long (0.1")

3 mm LED: Red

Resistor 220 ohm

Arduino UNO

5 mm LED: Green

Tools and machines

Soldering iron (generic)

Apps and platforms

Arduino IDE

Project description

Code

Arduino code

arduino

the code to run the game

1//set pins
2int button0pin = 2;
3int selectedpin = 11; //selected  light from pin 3 to 11
4int button10pin = 12;
5int resetpin = 13;
6
7
8//set  variables
9int clockspeed = 50; //miliseconds
10int menutickspeed = 1000; //how  long between next LED light up
11int holdexitmenu = 5000; //time for holding both  buttons to exit main menu mode
12int holdrestart = 5000;
13int button0holdtime  = 0; //how long button has been held in miliseconds
14int button10holdtime = 0;
15
16boolean  backwards = false;
17boolean button0press = false;
18boolean button10press = false;
19
20int  stoppin; //pin player(s) stop at
21int smallplayerscore = 0;
22int bigplayerscore  = 0;
23int notchanging = 1;
24int i;
25int j;
26
27
28
29void(* resetFunc)  (void) = 0; //declare reset function @ address 0 
30
31
32
33
34
35void setup()  {
36//set pinmodes
37pinMode(button0pin, INPUT);
38for (i=3; i<=11; i=i+1) {
39      pinMode(i, OUTPUT);
40}
41pinMode(button10pin, INPUT);
42pinMode(resetpin,  INPUT);
43
44
45//be in main menu state until both buttons pressed
46while (button0holdtime  < holdexitmenu && button10holdtime < holdexitmenu) {
47  delay(menutickspeed);  //delay each "tick" by clock speed
48
49  if (digitalRead(resetpin) == HIGH)  {
50    for (i=3; i<=11; i=i+1) {    //reset all pins
51      digitalWrite(i,  LOW);
52    }
53    resetFunc();  //restart program
54  
55  }
56  if (digitalRead(button0pin)  == HIGH) {   //test if button0 is pressed
57    button0press = true;
58    button0holdtime  = button0holdtime + menutickspeed; 
59  }
60  else {
61    button0press = false;
62    button0holdtime = 0;
63  }
64  
65  
66  if (digitalRead(button10pin) ==  HIGH) {    //test if button10 is pressed
67    button10press = true;  
68    button10holdtime  = button10holdtime + menutickspeed; 
69  }
70  else {
71    button10press = false;
72    button10holdtime = 0;
73  }
74  
75
76
77
78  
79  if (backwards == false)  {  ////meue lighting program
80  
81    if (selectedpin != 11) {
82      digitalWrite(selectedpin,  HIGH);
83      digitalWrite((selectedpin - 1), LOW);
84      selectedpin = selectedpin  + 1;
85    }
86  
87    else {
88      digitalWrite(selectedpin, HIGH);
89      digitalWrite((selectedpin - 1), LOW);
90      selectedpin = selectedpin -  1;
91      backwards = true;
92    }
93  
94  }
95  
96  else {
97  
98    if (selectedpin != 3) {
99      digitalWrite(selectedpin, HIGH);
100      digitalWrite((selectedpin  + 1), LOW);
101      selectedpin = selectedpin - 1; 
102    }
103  
104    else  {
105      digitalWrite(selectedpin, HIGH);
106      digitalWrite((selectedpin +  1), LOW);
107      selectedpin = selectedpin + 1;
108      backwards = false;
109    }
110    
111  }
112  
113}  
114  
115  
116//exit main menu (all lights flash  3 times)
117for(j=1; j<=3; j=j+1) {
118  for (i=3; i<=11; i=i+1) {
119    digitalWrite(i,  LOW);
120  }
121  delay(500);
122  for (i=3; i<=11; i=i+1) {
123    digitalWrite(i,  HIGH);
124  }
125  delay(500);
126}
127
128 for (i=3; i<=11; i=i+1) {    //reset  all pins
129    digitalWrite(i, LOW);
130  }
131
132button0holdtime = 0;
133button10holdtime  = 0;
134
135}
136
137
138
139  
140
141
142
143
144
145  
146void loop() {
147  delay(clockspeed);
148  //test if reset
149  if (digitalRead(resetpin) == HIGH) {
150     for (i=3; i<=11;  i=i+1) {    //reset all pins
151       digitalWrite(i, LOW);
152     }
153     resetFunc();  //restart program
154  }
155
156  
157  //read 0 button 
158  if (digitalRead(button0pin)  == HIGH){
159    button0press = true;    
160
161    if (selectedpin == 11) { //test  if big player score
162      bigplayerscore = bigplayerscore + 1; //add score
163      
164      if (bigplayerscore >= 5) { //test if win       
165        for (i=3;  i<=11; i=i+1) {     //run win program
166          digitalWrite(i, LOW);
167        }
168
169        while(notchanging == 1) {//make infinite loop unless reset
170          digitalWrite(11,  HIGH);
171          delay(500);
172          digitalWrite(11, LOW);
173          delay(500);
174
175          //test if reset
176          if (digitalRead(resetpin) == HIGH) {
177            for (i=3; i<=11; i=i+1) {    //reset all pins
178              digitalWrite(i,  LOW);
179            }
180            resetFunc();  //restart program
181           }
182        }
183      }
184
185      
186      for (i=3; i<=11; i=i+1) { //turn all  lights off
187        digitalWrite(i, LOW);
188      }
189      for (i=1; i<=bigplayerscore;  i=i+1) { //if score, flash light
190        digitalWrite(11, LOW);
191        delay(500);
192        digitalWrite(11, HIGH);
193        delay(500);
194      }
195    }
196    
197    for (i=3; i<=11; i=i+1) { //turn all lights off
198      digitalWrite(i, LOW);
199    }
200    for (i=3; i<=11; i=i+1) {    //reset all pins
201    digitalWrite(i,  LOW);
202    }
203    digitalWrite(selectedpin, HIGH);
204    delay(500);
205    digitalWrite(selectedpin,LOW);  
206  
207  }
208  
209  else {
210    button0press = false;      
211  }
212
213  
214
215
216    //read 10 button
217  if (digitalRead(button10pin) == HIGH){    
218    button10press = true;
219
220    if (selectedpin == 3) { //test if small player  score
221      smallplayerscore = smallplayerscore + 1; //add score
222     
223      if (smallplayerscore >= 5) { //test if win
224        for (i=3; i<=11; i=i+1)  {     //run win program
225          digitalWrite(i, LOW);
226        }
227
228        while(notchanging == 1) {//make infinite loop unless reset
229          digitalWrite(3,  HIGH);
230          delay(500);
231          digitalWrite(3, LOW);
232          delay(500);
233
234          //test if reset
235          if (digitalRead(resetpin) == HIGH) {
236            for (i=3; i<=11; i=i+1) {    //reset all pins
237              digitalWrite(i,  LOW);
238            }
239            resetFunc();  //restart program
240           }
241        }
242      }
243
244      
245      for (i=3; i<=11; i=i+1) { //turn all  lights off
246        digitalWrite(i, LOW);
247      }
248      for (i=1; i<=smallplayerscore;  i=i+1) { //if score, flash light
249        digitalWrite(3, LOW);
250        delay(500);
251        digitalWrite(3, HIGH);
252        delay(500);
253      }
254    }
255    
256    for (i=3; i<=11; i=i+1) { //turn all lights off
257      digitalWrite(i, LOW);
258    }
259    for (i=3; i<=11; i=i+1) {    //reset all pins
260    digitalWrite(i,  LOW);
261    }
262    digitalWrite(selectedpin, HIGH);
263    delay(500);
264    digitalWrite(selectedpin,LOW);  
265
266  }
267  else {
268    button10press = false;   
269  }
270
271  
272
273
274
275  if (backwards == false) {  ////flashing back and forth
276  
277    if (selectedpin  != 11) {
278      digitalWrite(selectedpin, HIGH);
279      digitalWrite((selectedpin  - 1), LOW);
280      selectedpin = selectedpin + 1;
281    }
282  
283    else {
284      digitalWrite(selectedpin, HIGH);
285      digitalWrite((selectedpin - 1),  LOW);
286      selectedpin = selectedpin - 1;
287      backwards = true;
288    }
289  
290  }
291
292
293
294  
295  else {
296  
297    if (selectedpin != 3) {
298      digitalWrite(selectedpin,  HIGH);
299      digitalWrite((selectedpin + 1), LOW);
300      selectedpin = selectedpin  - 1;
301    }
302  
303    else {
304      digitalWrite(selectedpin, HIGH);
305      digitalWrite((selectedpin + 1), LOW);
306      selectedpin = selectedpin +  1;
307      backwards = false;
308    }
309  
310  }
311  
312
313} 
314  
315

//set pins
int button0pin = 2;
int selectedpin = 11; //selected  light from pin 3 to 11
int button10pin = 12;
int resetpin = 13;


//set  variables
int clockspeed = 50; //miliseconds
int menutickspeed = 1000; //how  long between next LED light up
int holdexitmenu = 5000; //time for holding both  buttons to exit main menu mode
int holdrestart = 5000;
int button0holdtime  = 0; //how long button has been held in miliseconds
int button10holdtime = 0;

boolean  backwards = false;
boolean button0press = false;
boolean button10press = false;

int  stoppin; //pin player(s) stop at
int smallplayerscore = 0;
int bigplayerscore  = 0;
int notchanging = 1;
int i;
int j;



void(* resetFunc)  (void) = 0; //declare reset function @ address 0 





void setup()  {
//set pinmodes
pinMode(button0pin, INPUT);
for (i=3; i<=11; i=i+1) {
      pinMode(i, OUTPUT);
}
pinMode(button10pin, INPUT);
pinMode(resetpin,  INPUT);


//be in main menu state until both buttons pressed
while (button0holdtime  < holdexitmenu && button10holdtime < holdexitmenu) {
  delay(menutickspeed);  //delay each "tick" by clock speed

  if (digitalRead(resetpin) == HIGH)  {
    for (i=3; i<=11; i=i+1) {    //reset all pins
      digitalWrite(i,  LOW);
    }
    resetFunc();  //restart program
  
  }
  if (digitalRead(button0pin)  == HIGH) {   //test if button0 is pressed
    button0press = true;
    button0holdtime  = button0holdtime + menutickspeed; 
  }
  else {
    button0press = false;
    button0holdtime = 0;
  }
  
  
  if (digitalRead(button10pin) ==  HIGH) {    //test if button10 is pressed
    button10press = true;  
    button10holdtime  = button10holdtime + menutickspeed; 
  }
  else {
    button10press = false;
    button10holdtime = 0;
  }
  



  
  if (backwards == false)  {  ////meue lighting program
  
    if (selectedpin != 11) {
      digitalWrite(selectedpin,  HIGH);
      digitalWrite((selectedpin - 1), LOW);
      selectedpin = selectedpin  + 1;
    }
  
    else {
      digitalWrite(selectedpin, HIGH);
      digitalWrite((selectedpin - 1), LOW);
      selectedpin = selectedpin -  1;
      backwards = true;
    }
  
  }
  
  else {
  
    if (selectedpin != 3) {
      digitalWrite(selectedpin, HIGH);
      digitalWrite((selectedpin  + 1), LOW);
      selectedpin = selectedpin - 1; 
    }
  
    else  {
      digitalWrite(selectedpin, HIGH);
      digitalWrite((selectedpin +  1), LOW);
      selectedpin = selectedpin + 1;
      backwards = false;
    }
    
  }
  
}  
  
  
//exit main menu (all lights flash  3 times)
for(j=1; j<=3; j=j+1) {
  for (i=3; i<=11; i=i+1) {
    digitalWrite(i,  LOW);
  }
  delay(500);
  for (i=3; i<=11; i=i+1) {
    digitalWrite(i,  HIGH);
  }
  delay(500);
}

 for (i=3; i<=11; i=i+1) {    //reset  all pins
    digitalWrite(i, LOW);
  }

button0holdtime = 0;
button10holdtime  = 0;

}



  





  
void loop() {
  delay(clockspeed);
  //test if reset
  if (digitalRead(resetpin) == HIGH) {
     for (i=3; i<=11;  i=i+1) {    //reset all pins
       digitalWrite(i, LOW);
     }
     resetFunc();  //restart program
  }

  
  //read 0 button 
  if (digitalRead(button0pin)  == HIGH){
    button0press = true;    

    if (selectedpin == 11) { //test  if big player score
      bigplayerscore = bigplayerscore + 1; //add score
      
      if (bigplayerscore >= 5) { //test if win       
        for (i=3;  i<=11; i=i+1) {     //run win program
          digitalWrite(i, LOW);
        }

        while(notchanging == 1) {//make infinite loop unless reset
          digitalWrite(11,  HIGH);
          delay(500);
          digitalWrite(11, LOW);
          delay(500);

          //test if reset
          if (digitalRead(resetpin) == HIGH) {
            for (i=3; i<=11; i=i+1) {    //reset all pins
              digitalWrite(i,  LOW);
            }
            resetFunc();  //restart program
           }
        }
      }

      
      for (i=3; i<=11; i=i+1) { //turn all  lights off
        digitalWrite(i, LOW);
      }
      for (i=1; i<=bigplayerscore;  i=i+1) { //if score, flash light
        digitalWrite(11, LOW);
        delay(500);
        digitalWrite(11, HIGH);
        delay(500);
      }
    }
    
    for (i=3; i<=11; i=i+1) { //turn all lights off
      digitalWrite(i, LOW);
    }
    for (i=3; i<=11; i=i+1) {    //reset all pins
    digitalWrite(i,  LOW);
    }
    digitalWrite(selectedpin, HIGH);
    delay(500);
    digitalWrite(selectedpin,LOW);  
  
  }
  
  else {
    button0press = false;      
  }

  


    //read 10 button
  if (digitalRead(button10pin) == HIGH){    
    button10press = true;

    if (selectedpin == 3) { //test if small player  score
      smallplayerscore = smallplayerscore + 1; //add score
     
      if (smallplayerscore >= 5) { //test if win
        for (i=3; i<=11; i=i+1)  {     //run win program
          digitalWrite(i, LOW);
        }

        while(notchanging == 1) {//make infinite loop unless reset
          digitalWrite(3,  HIGH);
          delay(500);
          digitalWrite(3, LOW);
          delay(500);

          //test if reset
          if (digitalRead(resetpin) == HIGH) {
            for (i=3; i<=11; i=i+1) {    //reset all pins
              digitalWrite(i,  LOW);
            }
            resetFunc();  //restart program
           }
        }
      }

      
      for (i=3; i<=11; i=i+1) { //turn all  lights off
        digitalWrite(i, LOW);
      }
      for (i=1; i<=smallplayerscore;  i=i+1) { //if score, flash light
        digitalWrite(3, LOW);
        delay(500);
        digitalWrite(3, HIGH);
        delay(500);
      }
    }
    
    for (i=3; i<=11; i=i+1) { //turn all lights off
      digitalWrite(i, LOW);
    }
    for (i=3; i<=11; i=i+1) {    //reset all pins
    digitalWrite(i,  LOW);
    }
    digitalWrite(selectedpin, HIGH);
    delay(500);
    digitalWrite(selectedpin,LOW);  

  }
  else {
    button10press = false;   
  }

  



  if (backwards == false) {  ////flashing back and forth
  
    if (selectedpin  != 11) {
      digitalWrite(selectedpin, HIGH);
      digitalWrite((selectedpin  - 1), LOW);
      selectedpin = selectedpin + 1;
    }
  
    else {
      digitalWrite(selectedpin, HIGH);
      digitalWrite((selectedpin - 1),  LOW);
      selectedpin = selectedpin - 1;
      backwards = true;
    }
  
  }



  
  else {
  
    if (selectedpin != 3) {
      digitalWrite(selectedpin,  HIGH);
      digitalWrite((selectedpin + 1), LOW);
      selectedpin = selectedpin  - 1;
    }
  
    else {
      digitalWrite(selectedpin, HIGH);
      digitalWrite((selectedpin + 1), LOW);
      selectedpin = selectedpin +  1;
      backwards = false;
    }
  
  }
  

}

Arduino code

arduino

the code to run the game

1//set pins
2int button0pin = 2;
3int selectedpin = 11; //selected   light from pin 3 to 11
4int button10pin = 12;
5int resetpin = 13;
6
7
8//set   variables
9int clockspeed = 50; //miliseconds
10int menutickspeed = 1000; //how   long between next LED light up
11int holdexitmenu = 5000; //time for holding both   buttons to exit main menu mode
12int holdrestart = 5000;
13int button0holdtime   = 0; //how long button has been held in miliseconds
14int button10holdtime = 0;
15
16boolean   backwards = false;
17boolean button0press = false;
18boolean button10press = false;
19
20int   stoppin; //pin player(s) stop at
21int smallplayerscore = 0;
22int bigplayerscore   = 0;
23int notchanging = 1;
24int i;
25int j;
26
27
28
29void(* resetFunc)   (void) = 0; //declare reset function @ address 0 
30
31
32
33
34
35void setup()   {
36//set pinmodes
37pinMode(button0pin, INPUT);
38for (i=3; i<=11; i=i+1) {
39       pinMode(i, OUTPUT);
40}
41pinMode(button10pin, INPUT);
42pinMode(resetpin,   INPUT);
43
44
45//be in main menu state until both buttons pressed
46while (button0holdtime   < holdexitmenu && button10holdtime < holdexitmenu) {
47  delay(menutickspeed);   //delay each "tick" by clock speed
48
49  if (digitalRead(resetpin) == HIGH)   {
50    for (i=3; i<=11; i=i+1) {    //reset all pins
51      digitalWrite(i,   LOW);
52    }
53    resetFunc();  //restart program
54  
55  }
56  if (digitalRead(button0pin)   == HIGH) {   //test if button0 is pressed
57    button0press = true;
58    button0holdtime   = button0holdtime + menutickspeed; 
59  }
60  else {
61    button0press = false;
62     button0holdtime = 0;
63  }
64  
65  
66  if (digitalRead(button10pin) ==   HIGH) {    //test if button10 is pressed
67    button10press = true;  
68    button10holdtime   = button10holdtime + menutickspeed; 
69  }
70  else {
71    button10press = false;
72     button10holdtime = 0;
73  }
74  
75
76
77
78  
79  if (backwards == false)   {  ////meue lighting program
80  
81    if (selectedpin != 11) {
82      digitalWrite(selectedpin,   HIGH);
83      digitalWrite((selectedpin - 1), LOW);
84      selectedpin = selectedpin   + 1;
85    }
86  
87    else {
88      digitalWrite(selectedpin, HIGH);
89       digitalWrite((selectedpin - 1), LOW);
90      selectedpin = selectedpin -   1;
91      backwards = true;
92    }
93  
94  }
95  
96  else {
97  
98     if (selectedpin != 3) {
99      digitalWrite(selectedpin, HIGH);
100      digitalWrite((selectedpin   + 1), LOW);
101      selectedpin = selectedpin - 1; 
102    }
103  
104    else   {
105      digitalWrite(selectedpin, HIGH);
106      digitalWrite((selectedpin +   1), LOW);
107      selectedpin = selectedpin + 1;
108      backwards = false;
109     }
110    
111  }
112  
113}  
114  
115  
116//exit main menu (all lights flash   3 times)
117for(j=1; j<=3; j=j+1) {
118  for (i=3; i<=11; i=i+1) {
119    digitalWrite(i,   LOW);
120  }
121  delay(500);
122  for (i=3; i<=11; i=i+1) {
123    digitalWrite(i,   HIGH);
124  }
125  delay(500);
126}
127
128 for (i=3; i<=11; i=i+1) {    //reset   all pins
129    digitalWrite(i, LOW);
130  }
131
132button0holdtime = 0;
133button10holdtime   = 0;
134
135}
136
137
138
139  
140
141
142
143
144
145  
146void loop() {
147  delay(clockspeed);
148   //test if reset
149  if (digitalRead(resetpin) == HIGH) {
150     for (i=3; i<=11;   i=i+1) {    //reset all pins
151       digitalWrite(i, LOW);
152     }
153     resetFunc();   //restart program
154  }
155
156  
157  //read 0 button 
158  if (digitalRead(button0pin)   == HIGH){
159    button0press = true;    
160
161    if (selectedpin == 11) { //test   if big player score
162      bigplayerscore = bigplayerscore + 1; //add score
163       
164      if (bigplayerscore >= 5) { //test if win       
165        for (i=3;   i<=11; i=i+1) {     //run win program
166          digitalWrite(i, LOW);
167        }
168
169         while(notchanging == 1) {//make infinite loop unless reset
170          digitalWrite(11,   HIGH);
171          delay(500);
172          digitalWrite(11, LOW);
173          delay(500);
174
175           //test if reset
176          if (digitalRead(resetpin) == HIGH) {
177             for (i=3; i<=11; i=i+1) {    //reset all pins
178              digitalWrite(i,   LOW);
179            }
180            resetFunc();  //restart program
181           }
182         }
183      }
184
185      
186      for (i=3; i<=11; i=i+1) { //turn all   lights off
187        digitalWrite(i, LOW);
188      }
189      for (i=1; i<=bigplayerscore;   i=i+1) { //if score, flash light
190        digitalWrite(11, LOW);
191        delay(500);
192         digitalWrite(11, HIGH);
193        delay(500);
194      }
195    }
196    
197     for (i=3; i<=11; i=i+1) { //turn all lights off
198      digitalWrite(i, LOW);
199     }
200    for (i=3; i<=11; i=i+1) {    //reset all pins
201    digitalWrite(i,   LOW);
202    }
203    digitalWrite(selectedpin, HIGH);
204    delay(500);
205    digitalWrite(selectedpin,LOW);   
206  
207  }
208  
209  else {
210    button0press = false;      
211  }
212
213   
214
215
216    //read 10 button
217  if (digitalRead(button10pin) == HIGH){    
218     button10press = true;
219
220    if (selectedpin == 3) { //test if small player   score
221      smallplayerscore = smallplayerscore + 1; //add score
222     
223       if (smallplayerscore >= 5) { //test if win
224        for (i=3; i<=11; i=i+1)   {     //run win program
225          digitalWrite(i, LOW);
226        }
227
228         while(notchanging == 1) {//make infinite loop unless reset
229          digitalWrite(3,   HIGH);
230          delay(500);
231          digitalWrite(3, LOW);
232          delay(500);
233
234           //test if reset
235          if (digitalRead(resetpin) == HIGH) {
236             for (i=3; i<=11; i=i+1) {    //reset all pins
237              digitalWrite(i,   LOW);
238            }
239            resetFunc();  //restart program
240           }
241         }
242      }
243
244      
245      for (i=3; i<=11; i=i+1) { //turn all   lights off
246        digitalWrite(i, LOW);
247      }
248      for (i=1; i<=smallplayerscore;   i=i+1) { //if score, flash light
249        digitalWrite(3, LOW);
250        delay(500);
251         digitalWrite(3, HIGH);
252        delay(500);
253      }
254    }
255    
256     for (i=3; i<=11; i=i+1) { //turn all lights off
257      digitalWrite(i, LOW);
258     }
259    for (i=3; i<=11; i=i+1) {    //reset all pins
260    digitalWrite(i,   LOW);
261    }
262    digitalWrite(selectedpin, HIGH);
263    delay(500);
264    digitalWrite(selectedpin,LOW);   
265
266  }
267  else {
268    button10press = false;   
269  }
270
271  
272
273
274
275   if (backwards == false) {  ////flashing back and forth
276  
277    if (selectedpin   != 11) {
278      digitalWrite(selectedpin, HIGH);
279      digitalWrite((selectedpin   - 1), LOW);
280      selectedpin = selectedpin + 1;
281    }
282  
283    else {
284       digitalWrite(selectedpin, HIGH);
285      digitalWrite((selectedpin - 1),   LOW);
286      selectedpin = selectedpin - 1;
287      backwards = true;
288    }
289   
290  }
291
292
293
294  
295  else {
296  
297    if (selectedpin != 3) {
298      digitalWrite(selectedpin,   HIGH);
299      digitalWrite((selectedpin + 1), LOW);
300      selectedpin = selectedpin   - 1;
301    }
302  
303    else {
304      digitalWrite(selectedpin, HIGH);
305       digitalWrite((selectedpin + 1), LOW);
306      selectedpin = selectedpin +   1;
307      backwards = false;
308    }
309  
310  }
311  
312
313} 
314  
315

//set pins
int button0pin = 2;
int selectedpin = 11; //selected   light from pin 3 to 11
int button10pin = 12;
int resetpin = 13;


//set   variables
int clockspeed = 50; //miliseconds
int menutickspeed = 1000; //how   long between next LED light up
int holdexitmenu = 5000; //time for holding both   buttons to exit main menu mode
int holdrestart = 5000;
int button0holdtime   = 0; //how long button has been held in miliseconds
int button10holdtime = 0;

boolean   backwards = false;
boolean button0press = false;
boolean button10press = false;

int   stoppin; //pin player(s) stop at
int smallplayerscore = 0;
int bigplayerscore   = 0;
int notchanging = 1;
int i;
int j;



void(* resetFunc)   (void) = 0; //declare reset function @ address 0 





void setup()   {
//set pinmodes
pinMode(button0pin, INPUT);
for (i=3; i<=11; i=i+1) {
       pinMode(i, OUTPUT);
}
pinMode(button10pin, INPUT);
pinMode(resetpin,   INPUT);


//be in main menu state until both buttons pressed
while (button0holdtime   < holdexitmenu && button10holdtime < holdexitmenu) {
  delay(menutickspeed);   //delay each "tick" by clock speed

  if (digitalRead(resetpin) == HIGH)   {
    for (i=3; i<=11; i=i+1) {    //reset all pins
      digitalWrite(i,   LOW);
    }
    resetFunc();  //restart program
  
  }
  if (digitalRead(button0pin)   == HIGH) {   //test if button0 is pressed
    button0press = true;
    button0holdtime   = button0holdtime + menutickspeed; 
  }
  else {
    button0press = false;
     button0holdtime = 0;
  }
  
  
  if (digitalRead(button10pin) ==   HIGH) {    //test if button10 is pressed
    button10press = true;  
    button10holdtime   = button10holdtime + menutickspeed; 
  }
  else {
    button10press = false;
     button10holdtime = 0;
  }
  



  
  if (backwards == false)   {  ////meue lighting program
  
    if (selectedpin != 11) {
      digitalWrite(selectedpin,   HIGH);
      digitalWrite((selectedpin - 1), LOW);
      selectedpin = selectedpin   + 1;
    }
  
    else {
      digitalWrite(selectedpin, HIGH);
       digitalWrite((selectedpin - 1), LOW);
      selectedpin = selectedpin -   1;
      backwards = true;
    }
  
  }
  
  else {
  
     if (selectedpin != 3) {
      digitalWrite(selectedpin, HIGH);
      digitalWrite((selectedpin   + 1), LOW);
      selectedpin = selectedpin - 1; 
    }
  
    else   {
      digitalWrite(selectedpin, HIGH);
      digitalWrite((selectedpin +   1), LOW);
      selectedpin = selectedpin + 1;
      backwards = false;
     }
    
  }
  
}  
  
  
//exit main menu (all lights flash   3 times)
for(j=1; j<=3; j=j+1) {
  for (i=3; i<=11; i=i+1) {
    digitalWrite(i,   LOW);
  }
  delay(500);
  for (i=3; i<=11; i=i+1) {
    digitalWrite(i,   HIGH);
  }
  delay(500);
}

 for (i=3; i<=11; i=i+1) {    //reset   all pins
    digitalWrite(i, LOW);
  }

button0holdtime = 0;
button10holdtime   = 0;

}



  





  
void loop() {
  delay(clockspeed);
   //test if reset
  if (digitalRead(resetpin) == HIGH) {
     for (i=3; i<=11;   i=i+1) {    //reset all pins
       digitalWrite(i, LOW);
     }
     resetFunc();   //restart program
  }

  
  //read 0 button 
  if (digitalRead(button0pin)   == HIGH){
    button0press = true;    

    if (selectedpin == 11) { //test   if big player score
      bigplayerscore = bigplayerscore + 1; //add score
       
      if (bigplayerscore >= 5) { //test if win       
        for (i=3;   i<=11; i=i+1) {     //run win program
          digitalWrite(i, LOW);
        }

         while(notchanging == 1) {//make infinite loop unless reset
          digitalWrite(11,   HIGH);
          delay(500);
          digitalWrite(11, LOW);
          delay(500);

           //test if reset
          if (digitalRead(resetpin) == HIGH) {
             for (i=3; i<=11; i=i+1) {    //reset all pins
              digitalWrite(i,   LOW);
            }
            resetFunc();  //restart program
           }
         }
      }

      
      for (i=3; i<=11; i=i+1) { //turn all   lights off
        digitalWrite(i, LOW);
      }
      for (i=1; i<=bigplayerscore;   i=i+1) { //if score, flash light
        digitalWrite(11, LOW);
        delay(500);
         digitalWrite(11, HIGH);
        delay(500);
      }
    }
    
     for (i=3; i<=11; i=i+1) { //turn all lights off
      digitalWrite(i, LOW);
     }
    for (i=3; i<=11; i=i+1) {    //reset all pins
    digitalWrite(i,   LOW);
    }
    digitalWrite(selectedpin, HIGH);
    delay(500);
    digitalWrite(selectedpin,LOW);   
  
  }
  
  else {
    button0press = false;      
  }

   


    //read 10 button
  if (digitalRead(button10pin) == HIGH){    
     button10press = true;

    if (selectedpin == 3) { //test if small player   score
      smallplayerscore = smallplayerscore + 1; //add score
     
       if (smallplayerscore >= 5) { //test if win
        for (i=3; i<=11; i=i+1)   {     //run win program
          digitalWrite(i, LOW);
        }

         while(notchanging == 1) {//make infinite loop unless reset
          digitalWrite(3,   HIGH);
          delay(500);
          digitalWrite(3, LOW);
          delay(500);

           //test if reset
          if (digitalRead(resetpin) == HIGH) {
             for (i=3; i<=11; i=i+1) {    //reset all pins
              digitalWrite(i,   LOW);
            }
            resetFunc();  //restart program
           }
         }
      }

      
      for (i=3; i<=11; i=i+1) { //turn all   lights off
        digitalWrite(i, LOW);
      }
      for (i=1; i<=smallplayerscore;   i=i+1) { //if score, flash light
        digitalWrite(3, LOW);
        delay(500);
         digitalWrite(3, HIGH);
        delay(500);
      }
    }
    
     for (i=3; i<=11; i=i+1) { //turn all lights off
      digitalWrite(i, LOW);
     }
    for (i=3; i<=11; i=i+1) {    //reset all pins
    digitalWrite(i,   LOW);
    }
    digitalWrite(selectedpin, HIGH);
    delay(500);
    digitalWrite(selectedpin,LOW);   

  }
  else {
    button10press = false;   
  }

  



   if (backwards == false) {  ////flashing back and forth
  
    if (selectedpin   != 11) {
      digitalWrite(selectedpin, HIGH);
      digitalWrite((selectedpin   - 1), LOW);
      selectedpin = selectedpin + 1;
    }
  
    else {
       digitalWrite(selectedpin, HIGH);
      digitalWrite((selectedpin - 1),   LOW);
      selectedpin = selectedpin - 1;
      backwards = true;
    }
   
  }



  
  else {
  
    if (selectedpin != 3) {
      digitalWrite(selectedpin,   HIGH);
      digitalWrite((selectedpin + 1), LOW);
      selectedpin = selectedpin   - 1;
    }
  
    else {
      digitalWrite(selectedpin, HIGH);
       digitalWrite((selectedpin + 1), LOW);
      selectedpin = selectedpin +   1;
      backwards = false;
    }
  
  }
  

}

Downloadable files

custom PCB design

This is the PCB Arduino "shield" that will slot onto the Arduino

custom PCB design

Documentation

Gerber file of PCB design

This is the design of the PCB that slots onto the Arduino, it can be sent to any manufacturer for it to be made. It is in Gerber format which is what most manufacturers take.

Gerber file of PCB design

This is the design of the PCB that slots onto the Arduino, it can be sent to any manufacturer for it to be made. It is in Gerber format which is what most manufacturers take.

Gerber file of PCB design

Comments

Only logged in users can leave comments

22warehamD

0 Followers

•

0 Projects

Intro