Brainium Bridge Baby Monitor

Project tutorial by Victor Altamirano and Alejandro Sanchez

  • 69 views
  • 0 comments
  • 0 respects

MOSMusic

Project tutorial by EdOliver and Victor Altamirano

  • 3,569 views
  • 10 comments
  • 17 respects

BBM: Bridge Baby Monitor for Predictive Maintainence

Project tutorial by EdOliver and Victor Altamirano

  • 565 views
  • 0 comments
  • 18 respects


MOSMusic

Project tutorial by EdOliver and Victor Altamirano

  • 3,569 views
  • 10 comments
  • 17 respects

Droideka

Project in progress by nicogou

  • 13,692 views
  • 22 comments
  • 134 respects

AggroFox: Large-Scale and Urban Agriculture IoT Solution

Project tutorial by EdOliver and Victor Altamirano

  • 8,573 views
  • 1 comment
  • 32 respects

  • MOSMusic 9 months ago

    Yes, we know that we could not use the mosfet, but the price does not raise too much to use it and also makes sure that ANY microcontroller, due to the low current demand, works.

  • MOSMusic 9 months ago

    Yes, we know that we could not use the mosfet, but the price does not raise the price much to use it and also makes sure that any microcontroller, due to the low current demand, works. 10mA vs 60uA is still a significant improvement in the design.

  • MOSMusic 9 months ago

    The mosfet is a fundamental part in the design so that the arduino can perform the switching with the smallest current possible. With this design we go from 36mA to 60uA in the digital pins. The design without the MOSFET may be precarious to the microcontroller.

Add projectSign up / Login