Project tutorial
Assembling Arduino Case Kit

Assembling Arduino Case Kit © GPL3+

This tutorial tells you how to assemble your new Arduino/Genuino Wooden Case + Breadboard Wires Kit!

  • 1,162 views
  • 0 comments
  • 2 respects

Components and supplies

About this project

1. Step 1

Turn over the top on a plane, apply the glue on the edges of the side marked with the letter D and stick it with the top, making sure that the letter is always inside.

2. Step 2

Apply the glue on the sides of the side panels C, stick it with the top and the other elements previously positioned as in the photos.

3. Step 3

Take the guides with the letter K, apply the glue and stick them in place on the side D.

4. Step 4

Finally we will complete the main frame by fitting the side panels A and D to K guides, always after you have applied the right amount of glue.

5. Step 5

Now we will assembly the trays, put the panel E on the table and apply the glue on the side of the J pieces and the front panel B, after stick them each other and with the bottom.

6. Step 6

Finally we complete the first drawer applying the glue on the sides of the bottom G and stick it with the other pieces.

7. Step 7

Now repeat the steps for the second drawer, put the panel H on the table and apply the glue on the side of the J pieces and the front panel B, after stick them each other and with the bottom.

8. Step 8

Finally we complete the second drawer applying the glue on the sides of the bottom F and stick it with the other pieces.

9. Step 9

Now that we have all of our kit mounted we can put the breadboard on the top and our favorite Arduino!

Comments

Similar projects you might like

Rural Hack Kit

by Officine Innesto

  • 16,684 views
  • 3 comments
  • 30 respects

Handheld Infinity Kaleidoscope Group Kit

Project tutorial by Lucas Ainsworth

  • 9,093 views
  • 4 comments
  • 65 respects

3D Printed Case for a RaspPi 3, an Arduino and a 5" Display

Project tutorial by Jeremy Lindsay

  • 1,440 views
  • 0 comments
  • 7 respects

Minimal MIDI Drum Kit with 3D Printer

Project tutorial by ryokosaka

  • 9,884 views
  • 1 comment
  • 29 respects

Mix-A-Bot Bar Kit

Project tutorial by Team Mix-A-Bot

  • 9,231 views
  • 0 comments
  • 22 respects
Add projectSign up / Login