Project tutorial

Bitcoin BeerBar © Beerware

Bitcoin + Beer = ❤

  • 2,219 views
  • 1 comment
  • 9 respects

Components and supplies

Arduino Ethernet
×1
Parallax RFID Card Reader - Serial (#28140)
×1
Valve Plastic Water Solenoid Valve - 12V - 1/2" Nominal
×1
Liquid Flow Meter - Plastic 1/2" NPS Threaded
×1
DG600F Coin Acceptor
×1
9 Liters Cornelius keg
×1
Beer tap
×1

About this project

Proof of concept solution for a bar which accepts Bitcoin and fiat coins, RFID is used to keep track of personal accounts which can be deposit with Bitcoin or fiat.

Promo video with the Bitcoin BeerBar made by a fellow friend

Want to give a beer 1AnderspcRdma1MuHqWSxy8vA6wpnpmUqi

Fork the code https://github.com/Anders-Linden/BeerBar/

See Fritzing schematic at https://github.com/Anders-Linden/BeerBar/tree/master/Doc

Code

GitHub
Will add more information of how to set up the whole system, https://github.com/Anders-Linden/BeerBar
https://github.com/Anders-Linden/BeerBar

Project logs

Release party
Project log #6
about 3 years ago - 0 comments

I invited friends but none had Bitcoin so I hid a few paper wallets loaded with the amount of one beer


Read previous logs

Comments

Author

Photo
Asturaz
  • 1 project
  • 5 followers

Additional contributors

Published on

March 22, 2015
Share

Members who respect this project

Duinopro logoonly colourWd attp012DefaultDefaultPhoto 2017 10 02 11 10 39 dqcfdywh0zMerlin arch 4fnrmpnf6jDefaultDefault

and 1 other

See similar projects
you might like

Similar projects you might like

Control a wall outlet using an Arduino using this DIY solid state relay outlet.

DIY Relay Outlet Arduino

Project tutorial by Ben Jones

  • 24,350 views
  • 17 comments
  • 32 respects

Longboard that draws on its underside using an XY-plotter based on your travels

SketchBoard

Project tutorial by SketchBoard

  • 4,495 views
  • 20 comments
  • 3 respects

An innovative hiking stick that helps you explore your surroundings and share your experiences with others.

Mystick

Project tutorial by Mystick

  • 2,229 views
  • 19 comments
  • 6 respects

Open your door with a special knock using Arduino, Android Phone and 1Sheeld

Unlock your door with a knock

Project tutorial by Ashraf Nabil

  • 20,210 views
  • 11 comments
  • 54 respects

Control system for stable kite flight targeting airborne wind power generation. Hack-rig an autonomous kite, motor control, and webcam.

Kite Power Autopilot

Project in progress by 3 developers

  • 3,954 views
  • 15 comments
  • 7 respects

An obstacle-detection and GPS-enabled navigation wearable for the visually impaired.

Magoo

Project in progress by 4 developers

  • 7,615 views
  • 12 comments
  • 35 respects
Add projectSign up / Login