Public projects 1

Lightweight Arduino GSM Mobile Phone

Project tutorial by Avishek

  • 81,510 views
  • 84 comments
  • 133 respects


Respected projects 3

Easy Motion and Gesture Detection by PIR Sensor & Arduino

Project tutorial by ElectroPeak

  • 109,246 views
  • 14 comments
  • 390 respects

Lightweight Arduino GSM Mobile Phone

Project tutorial by Avishek

  • 81,510 views
  • 84 comments
  • 133 respects

How to Submit Content on Arduino Project Hub

by Arduino_Genuino

  • 103,132 views
  • 56 comments
  • 300 respects

  • Lightweight Arduino GSM Mobile Phone almost 4 years ago

    Hello Noah,

    Thanks for your appreciation,
    The HMI and TFT files have been mailed to you.
    Enjoy.

  • Lightweight Arduino GSM Mobile Phone about 4 years ago

    Hello RadianSad,

    I just check the datasheet pertaining to SIM808, all the AT Commands are supported, it should work without any problem.

    In fact if you connect the SIM808 with an Arduino bareMinimum, you should be able to communicate with with the SIM808. Also ensure that Pin connections are as per below.

    Arduino Serial Tx -> Rx GSM
    Arduino Serial Rx -> Tx GSM
    Arduino 3.3V -> GSM VCC
    Arduino Gnd -> GSM Gnd

    let me know if you are able to.

  • Lightweight Arduino GSM Mobile Phone about 4 years ago

    Hello RadianSad,

    Thanks for your like, well can you advise which GSM shield you are using?. or else you can connect your GSM module to your arduino bareMinimum i.e

    Arduino Serial Tx -> Rx GSM
    Arduino Serial Rx -> Tx GSM

    Then try to send commands to the GSM module e.g "AT+CLIP=1, AT+RST" and please share the output.

Add projectSign up / Login