Project tutorial
Talking Smart Glass for the Blind

Talking Smart Glass for the Blind © CC BY-NC-SA

A pair of talking smart glass, intended to help the visually impaired.

  • 3,710 views
  • 5 comments
  • 11 respects

Components and supplies

Necessary tools and machines

09507 01
Soldering iron (generic)
Plier

Apps and online services

About this project

Introduction

There are multiple smart accessories such as smart glasses, smartwatches, etc. available in the market. But all of them are built for us. There is a significant lack of technology to aid the physically challenged. I wanted to build something that is useful for the visually challenged people. So I designed low cost smart glass that can be used to help the visually impaired.

This project uses a few ultrasonic distance sensors, an Arduino Pro Mini, an MP3 player module, and some vibration motors.

The circuit board used in this project is designed in the form of a spectacle, which can be worn by a visually impaired person. An Arduino mounted on the spectacle will detect the obstacle with the help of the sensors and notify the user through headphones and vibration motors.

Flash the Pro Mini

  • Connect the Pro Mini to the computer using FTDI cable.
  • Select proper COM port.
  • Select 'Arduino Pro or Pro Mini.'
  • Click upload
Make sure to flash Arduino before soldering it to PCB. Once all the components are soldered, it will be bit harder to connect the programming header.

Assembling the PCB

  • Solder the components like Arduino, DF Player, Audio jack, Slide Switches to the PCB first.
  • We can't directly solder the HC-SR04 module available from market. some modification need to be done.
  • Straighten the male header using a pliers or de-solder the 90° headers and solder normal headers.
  • Add electrical tape to tha back of HC-SR04 to avoid short circuit.
  • Insert HC-SR04 to designated solder pads. hold the left and right HC-SR04 at an angle and apply solder.
  • Solder rest of the components such as power supply cable, slide switches, vibration motors etc.

Copying Audio Files to the SD card

Copy content of the Audio files folder to the root of the SD card.

Copy folders (01, 02, 03) itself, not its content.

This is my entry to PCBWAY PCB designing contest. If you like this project consider voting for my entry : https://www.pcbway.com/project/shareproject/Talking_Smart_Glass_For_Blind.html

Code

Schematics

The circuit diagram
Circuit diagram d3cbvspqa0

Comments

Similar projects you might like

Third Eye for The Blind

Project tutorial by Muhammed Azhar

  • 36,694 views
  • 30 comments
  • 87 respects

Smart Blind Assistant

Project in progress by Chandru S

  • 3,387 views
  • 1 comment
  • 4 respects

Smart Garbage Monitoring System Using Arduino 101

Project tutorial by Technovation

  • 21,394 views
  • 7 comments
  • 32 respects

Smart Blinds

Project tutorial by Froz3nArcher

  • 14,688 views
  • 3 comments
  • 49 respects

Smart Face Tracking Robot Car

Project tutorial by Sebastian Hernandez

  • 6,563 views
  • 5 comments
  • 39 respects

Smart gloves for the blind

Project tutorial by soumil shah

  • 6,048 views
  • 4 comments
  • 9 respects
Add projectSign up / Login