Public projects 0
Toolbox 4
Respected projects 41
Tripwire Automatically Minimizes Tabs When Someone Walks By
Project in progress by Najad
- 7,495 views
- 4 comments
- 35 respects
Architectural Model of a Bus Stop with Automatic Sunshade
Project showcase by addicttux
- 14,283 views
- 25 comments
- 46 respects
Comments 3
DrumCube, an Arduino Robot Drummer almost 3 years ago
A DIY Smart Insole to Check Your Pressure Distribution over 4 years ago
Thank your for your reply! I've found a FSR on Aliexpress with the model IMS-C20B, which they state can measure up to 100 kg but I have my doubts. Guess I'll give them a try and I'll keep working with my load cells by now. Regards!
A DIY Smart Insole to Check Your Pressure Distribution over 4 years ago
Hi! Congratulations for this project! I think it's quite amazing tbh! I'm relatively new to this and I'm trying to make my own pressure soles for a graduate project, however I currently am working with load cells (TAS-606) to measure weights between 100 - 200 kg during gait. Have you measured body weight or pressure during gait using the 406 FSR's? I ask because your plots show peaks of around 1.16 N.
Thanks!
Felicidades!