SIM800L GPRS Module with SMS Activated Devices

Project tutorial by EasyMades

  • 0 respects

Arduino RTC LED Clock

Project tutorial by EasyMades

  • 1 comment
  • 0 respects

Arduino Circuit Breaker

Project tutorial by EasyMades

  • 1 comment
  • 2 respects

Toolbox 3

Respected projects 1

  • Arduino RTC LED Clock 20 days ago

    This project is based on arduino RTC module. It can be stored memory the real time. You can use normal LEDs but need to use same color and same brand of LEDs, If you have selected different kind of LEDs, some LEDs may be glowed than others.
    Most of arduino beginners had prepared this project and also successfully completed.
    I hope you can make this project and enjoy the leisure.
    You can visit for more projects to
    Youtube :

  • A6 GSM GPRS Module AT Commands about 2 months ago

    This is another video about GRS/GSM modules. All the details about this A6 module programming for testing AT commands are included in this video. If you have any doubt, pls put it in the comments below.

    यह जीआरएस / जीएसएम मॉड्यूल के बारे में एक और वीडियो है। एटी कमांड के परीक्षण के लिए इस ए 6 मॉड्यूल प्रोग्रामिंग के बारे में सभी विवरण इस वीडियो में शामिल हैं। यदि आपको कोई संदेह है, तो pls इसे नीचे टिप्पणी में रखें।

  • Arduino Circuit Breaker about 2 months ago

    You can see the details from my website given below. Connect all the parts as per the given circuit diagram. Special thing is the current level of the sensor. I am using 30 amps sensor. You can select the current sensors as per your requirements.
    Once it is completed the wiring part, you can upload the code. I did some modifications to the code, so as to comply with our requirement. When the motor is jammed, this motor takes about 800 mili amperes , therefore, you have to find under witch current to set the motor stop. Then upload the code.
    Once the code is uploaded, you can see that the motor is starting to rotate, then I hold the motor by hand and not let it to be rotated. You can see, as the motor is jammed, current went high, and motor stopped.
    You can use this method for in such a situation the motor is jammed. To prevent from burning itself.
    Think creatively and use this for a useful way.
    Stay with “easy mades”

Add projectSign up / Login