A compact air quality, temperature and humidity monitor enclosed in a small wooden chest, with a four-row LCD display.
Project tutorial by Fillbee
An SKU237545 pressure sensor.
A simple to build, but very sensitive electromagnetic field detector.
Project tutorial by Mirko Pavleski
In this tutorial, you will learn how to calibrate and use MQ9 gas sensor with an Arduino board.
Dear friends welcome to another Arduino project tutorial! In this tutorial we are going to take a first look at the new BME280 sensor, a ...
Project tutorial by Nick Koumaris
The cables are jumper wires, the link below gives three types, male to male, male to female, female to female.
The i2c I soldered to the lcd screen, but you can buy them assembled, not much of an extra cost. That way the only soldering is on the data logger.
Yes, connected via the pins to the arduino.
For mounting the lcd display to stop it moving and holding in a specific place I used Haljia M3, Nylon black hex screw nut, PCB board pillars. Off Amazon again.
In the code above, the second url is where I got the code from, prior to making the changes I needed for my project, I have used the device against a calibrated pressure gauge, the results are very close, so the code seems suitable.
It’s best to contact the original author, via his YouTube link below.
I hope that helps.
Hi Marco, I have added the location of the git hub libraries. I hope that helps
Or connect with your social account:
New here? Create an account