Project tutorial
DFROBOT TDS Meter Sensor With Arduino and LCD || Measure...

DFROBOT TDS Meter Sensor With Arduino and LCD || Measure... © GPL3+

In this project, we will interface Gravity Analog TDS Sensor with Arduino Microcontroller and read the value in a 16×2 LCD Display

  • 2,264 views
  • 0 comments
  • 3 respects

Components and supplies

Necessary tools and machines

Apps and online services

About this project

DFROBOT TDS Meter Sensor With Arduino & LCD || Measure Water Quality in PPM || Techeonics

Introduction

TDS (Total Dissolved Solids) indicates how many milligrams of soluble solids are dissolved in one liter of water. In general, the higher the TDS value, the more soluble solids are dissolved in water, and the less clean the water is. Therefore, the TDS value can be used as one reference point for reflecting the cleanliness of water.

In this project, we will interface Gravity Analog TDS Sensor with Arduino Microcontroller and read the value in a 16×2 LCD Display (with i2c module)

For More:- https://techeonics.com/?p=331

Github:- https://github.com/gauravk5/Techeonics-Arduino-Cod...

Materials

Following are the components required for making this project.

DFROBOT Gravity Analog TDS Sensor

DFROBOT Gravity Analog TDS Sensor is an Arduino-compatible TDS sensor/Meter Kit for measuring TDS value of the water. It can be applied to domestic water, hydroponic and other fields of water quality testing. This product supports 3.3 ~ 5.5V wide voltage input, and 0 ~ 2.3V analog voltage output, which makes it compatible with 5V or 3.3V control systems or boards.

The excitation source is an AC signal, which can effectively prevent the probe from polarization and prolong the life of the probe, meanwhile, it can help increase the stability of the output signal. The TDS probe is waterproof, it can be immersed in water for long time measurement.

Interfacing TDS Sensor with Arduino

Source Code/Program

Source Code/Program Github

Tags: arduino, dfrobot, dfrobot tds meter sensor, iot, lcd with i2c, tds meter, techeconics, water quality meter

Leave a Reply Cancel reply

Code

Schematics

TDS WITH ARDUINO
Tds with arduino techeonics (2) tdsqu0gzkj

Comments

Similar projects you might like

How to make a thermometer with Arduino and the LM35 sensor

Project tutorial by Moreira

  • 1,462 views
  • 0 comments
  • 2 respects

Displaying Sensor Values on LCD

by Wimpie van den Berg

  • 119,786 views
  • 9 comments
  • 73 respects

Portable Arduino Temp/Humidity Sensor with LCD

Project tutorial by ThothLoki

  • 285,567 views
  • 164 comments
  • 399 respects

Soil Moisture Sensor With LCD Display

Project tutorial by Patel Darshil

  • 58,058 views
  • 19 comments
  • 86 respects

Arduino DIY Light Meter With BH1750 Sensor

Project tutorial by Nick Koumaris

  • 13,767 views
  • 2 comments
  • 7 respects

VU Meter for Audio Signal (dBu) using LCD

Project tutorial by deltakilo

  • 6,641 views
  • 0 comments
  • 6 respects
Add projectSign up / Login