LED Controlled by 3D Gesture Sensor

Project tutorial by HomeMadeGarbage

  • 2,965 views
  • 0 comments
  • 14 respects

Electrocardiogram Using TouchDesigner & Arduino

Project tutorial by HomeMadeGarbage

  • 5,447 views
  • 2 comments
  • 20 respects

Jigsaw Puzzle Timer

Project tutorial by HomeMadeGarbage

  • 634 views
  • 1 comment
  • 4 respects

Toolbox 3


Replicated projects 0

 HomeMadeGarbage hasn't replicated any projects yet.

Smartphone Controlled Arduino 4WD Robot Car

Project in progress by Andriy Baranov

  • 10,802 views
  • 20 comments
  • 38 respects

LEDog Collar

Project showcase by circuito.io team

  • 4,154 views
  • 2 comments
  • 23 respects

Graphical Programming Obstacle Avoidance Robot

Project tutorial by KittenBot

  • 1,725 views
  • 1 comment
  • 12 respects

  • Neopixel LED Eyeball Controlled by Nunchuck 7 months ago

    Great! I'd like to see that.

    Eye moving part in code
    LR = map(joyx, 29, 226, 0, 14);
    if (LR > 14) {
    LR = 14;
    }
    if (LR < 0) {
    LR = 0;
    }

    How about berrow for reverse
    LR = map(joyx, 29, 226, 0, 14);
    -> LR = map(joyx, 29, 226, 14, 0);

  • Neopixel LED Eyeball Controlled by Nunchuck 7 months ago

    Sure! There is no problem.

  • Convert Acceleration to Angle From MPU6050 I2C Sensor 8 months ago

    I tried Nunchaku component with Teensy 3.2. But it did not work... In case of Arduino UNO and ESP8266, they work very well.

    Teensy 3.2' s connections are as follows.
    Nunchaku VCC -> Teensy 3.3V
    Nunchaku GND -> Teensy GND
    Nunchaku SCL -> Teensy 19(A5)
    Nunchaku SDA -> Teensy 18(A4)

    Do you have any idea?

Add projectSign up / Login