Python user interface to calculate and show latitude/longitude using u-blox LEA-6H 02 GPS module and Arduino.
Project tutorial by Harshgosar
@Phil-S I have written neither about USB micro socket not antenna UFL connector, by micro connector I mean that white 6 wire connector which was micro and I don't have that small circuitry so replaced it with bigger size connector which I can easily deal with.
Also, this module has an inbuilt antenna(other side of the module, image not added) and no RF cables are needed that data is mostly processed in Ublox chip itself and it gives NMEA sentences in output on UART port, so the wire you are seeing are communication lines.
The black portion sitting on Ublox chip is styrofoam for protection : )
Yes that's also doable, Also some of Ublox modules does support USB communication directly, but not sure if they require any hardware modifications or not
It depends on your use case, you can go with cheap if you just want to have fun and learn with it, but if you want accuracy and precision in your project(commercial or industrial projects) then you may have to pay a fairly higher price.
Or connect with your social account:
New here? Create an account