Back

Comments 4

  • u-blox LEA-6H 02 GPS Module with Arduino and Python about 2 months ago

    Hi Hind,

    ZED F9P is way too different than LEA 6h in terms of design, working and functionalities that it offers. However, communication protocol remains the same(UART, I2C etc) by which you can send/receive data, some configuration parameter may differ.

    You will need to read datasheet in depth in order to understand exact working of it and I can help you design Arduino code(I'm not sure if that's code is openly available anywhere).

    Drop an email to harsh2astrotech@gmail.com

  • u-blox LEA-6H 02 GPS Module with Arduino and Python 9 months ago

    @Phil-S I have written neither about USB micro socket not antenna UFL connector, by micro connector I mean that white 6 wire connector which was micro and I don't have that small circuitry so replaced it with bigger size connector which I can easily deal with.

    Also, this module has an inbuilt antenna(other side of the module, image not added) and no RF cables are needed that data is mostly processed in Ublox chip itself and it gives NMEA sentences in output on UART port, so the wire you are seeing are communication lines.

    The black portion sitting on Ublox chip is styrofoam for protection : )

  • u-blox LEA-6H 02 GPS Module with Arduino and Python 9 months ago

    Yes that's also doable, Also some of Ublox modules does support USB communication directly, but not sure if they require any hardware modifications or not

  • u-blox LEA-6H 02 GPS Module with Arduino and Python 9 months ago

    It depends on your use case, you can go with cheap if you just want to have fun and learn with it, but if you want accuracy and precision in your project(commercial or industrial projects) then you may have to pay a fairly higher price.

Add projectSign up / Login