Components and supplies
PCBWay Custom PCB
Resistor 330 ohm
LED (generic)
Breadboard (generic)
Resistor 10k ohm
Male/Female Jumper Wires
Buzzer
Arduino Nano R3
Standard LCD - 16x2 White on Blue
Male/Male Jumper Wires
Pushbutton switch 12mm
Resistor 221 ohm
Tools and machines
Soldering iron (generic)
Apps and platforms
Arduino IDE
TinkerCad
Project description
Downloadable files
Water Bowl Refill Schematic.
I will elaborate on this on next week's video.
Water Bowl Refill Schematic.
Documentation
This is the layout of the PCB.
Without the grayed out parts and the connections to ground of the SWITCH and LCD.
This is the layout of the PCB.
This is what it would look like on the junction box.
Video of this will be uploaded next week.
This is what it would look like on the junction box.
This is what it would look like on the junction box.
Video of this will be uploaded next week.
This is what it would look like on the junction box.
This is the layout of the PCB.
Without the grayed out parts and the connections to ground of the SWITCH and LCD.
This is the layout of the PCB.
Comments
Only logged in users can leave comments
Heathen_Hacks-v2
0 Followers
•0 Projects
Table of contents
Intro
2
0