![]() |
| × | 1 |
Components and supplies
Apps and online services
About this project
Arduino 101 & Genuine 101 combine the ease-of-use of the classic boards with the latest technologies. The board recognizes gestures, and features a six-axis accelerometer and gyroscope. Control your projects with your phone over Bluetooth connectivity.
That is why it is very important to have the latest firmware and libraries possible.
In this mini tutorial, I will try to explain how to do it without dying in the attempt.
LOL :)
Let us begin
1. Download the following filesGo to GitHub and download corelibs-arduino101 and intel-arduino-tools.
Note.- Be careful to select in intel-arduino-tools, the correct branch for your Operating System and Processor Architecture.
2. Unzip the filesunzip the files and replace the old one, following the guide that is in GitHub.
3. Download BLE flashpackDownload BLE flashpack at GitHub and unzip, go inside an run flash_dfu.sh (Linux) or flash_dfu.bat (Windows).
4. Open Arduino IDE and try to upload some sketch.Note.- If you receive the message "Try pressing MASTER_RESET button", press it.
And now, your sketch it's uploaded and running.
That's it, your Arduino 101 is up and running.
I invite you to see and commented my other tutorials, your feedback, it gives me encouragement to write more tutorials.
Greetings.
Code
Libraries
Firmware
Comments
Author
Additional contributors
- Library source by 01org Intel Open Source Technology Center
Published on
January 1, 2017Members who respect this project
you might like