How to Connect MQ2 Gas Sensor to Arduino

How to Connect MQ2 Gas Sensor to Arduino © CC BY-NC-SA

MQ2 Sensor is a gas module and it is suitable to detect Hydrogen, LPG, Smoke, CO, and Alcohol. It has high sensitivity and fast response.

  • 58,765 views
  • 14 comments
  • 16 respects

Components and supplies

MQ 2 Gas Sensor
×1
16x2 I2C LCD Display
×1
Ph a000066 iso (1) ztbmubhmho
Arduino UNO
×1
Jumper Wires
×1

Apps and online services

Ide web
Arduino IDE

About this project

MQ2 Sensor is a gas module and it is suitable to detect Hydrogen, LPG, Smoke, CO, and Alcohol. It has high sensitivity and fast response time to measure and take the data. Sensitivity can be adjusted by potentiometer behind it:

Circuit

MQ2 Connections with Arduino:

MQ2 Connections with Arduino and IIC LCD Display:

Connections

Arduino              MQ2

  • AO                       A0
  • 5V                     VCC
  • GND                   GND

Code

Watch Video

For more projects and tutorials visit our website.

Code

Arduino
https://create.arduino.cc/editor/electronicsprojectshub/1b084772-3144-4952-bc51-f2b63b727e63/preview?embed

Comments

Author

Junezriyaz
Junez Riyaz
  • 2 projects
  • 5 followers

Published on

February 1, 2018
Share

Members who respect this project

PhotoPhotoKurucay2000DefaultPhoto

and 11 others

See similar projects
you might like

Similar projects you might like

Arduino And MQ2 Gas Sensor

The Grove Gas Sensor (MQ2) module is useful for gas leakage detection (home and industry). It is suitable for detecting H2, LPG, CH4 and CO.

Arduino And MQ2 Gas Sensor

Project showcase by Mahamudul Karim Khondaker

  • 24,673 views
  • 12 comments
  • 24 respects

In this tutorial, we will learn how to detect Smoke and inflammable gases using an MQ-2 sensor.

Smoke Detection using MQ-2 Gas Sensor

by Aritro Mukherjee

  • 441,186 views
  • 89 comments
  • 261 respects

In this tutorial, you will learn how to calibrate and use MQ9 gas sensor with an Arduino board.

How to Calibrate & Use MQ9 Gas Sensor w/ Arduino

by ElectroPeak

  • 29,752 views
  • 19 comments
  • 27 respects
How to Use a Gas Sensor (MQ-2)

This project will show you how to use an MQ-2 gas sensor.

How to Use a Gas Sensor (MQ-2)

by MisterBotBreak

  • 8,846 views
  • 1 comment
  • 15 respects
MQ-4 Natural Gas Sensor Experiment Based on Arduino

This project uses sensors to monitor indoor natural gas on the basis of Arduino, and will sound the alarm if the gas leak exceeds the limit.

MQ-4 Natural Gas Sensor Experiment Based on Arduino

Project tutorial by Andrew85

  • 19,370 views
  • 3 comments
  • 13 respects
DHT11 Temperature/Humidity Sensor

Take readings from the DHT11 Temperature/Humidity sensor and see them from the Arduino IDE Serial Monitor.

DHT11 Temperature/Humidity Sensor

Project tutorial by Zachary Haslam

  • 173,427 views
  • 52 comments
  • 114 respects
Add projectSign up / Login