Back

Comments 16

  • ReSpeaker Home Automation about 5 years ago

    Awesome Project. From where you bought the ReSpeaker?

  • Using IFTTT with BLynk over 5 years ago

    I have tested it. The maker channel is not working as now.I talked with the blynk guys(Dmitriy, pavel and vhymanskyy) the PUT/GET services are down as of now. They switched to blynk-cloud.com recently. It's the latest update.

  • Smart Doorbell over 5 years ago

    Is your Ethernet shield working fine? Getting ip is the step where it is connecting to the blynk cloud and a unique id has to be provided to the board.
    Make sure you have the latest libraries installed. Here is the link http://www.blynk.cc/getting-started

    :)

  • World Mood Lamp over 5 years ago

    This is the address.
    45.55.195.102:8442

  • Rain Warning Display on Mobile for your Home Garden over 5 years ago

    Glad you liked it :)

  • Control a LED from your Phone over 5 years ago

    Anytime man! The app and it's community are pretty awesome :)

  • World Mood Lamp over 5 years ago

    What happens is
    1) You are assigned an ip.
    Then your IFTTT recipe runs. IT checks for trigger words. If there are some then the maker channel is triggered. Your hardware is the maker channel and since you have provided the pin to be triggered it controls it remotely.

  • World Mood Lamp over 5 years ago

    Thanks man! Really appreciate it! :)

  • Smart Doorbell over 5 years ago

    Yes i know. I am sorry The app i am using doesn't support video as of now. I know the image is very off-putting but i couldn't find any relatable picture.

  • Control a LED from your Phone over 5 years ago

    Have taken care of it :D

  • Smart Doorbell over 5 years ago

    I am eagerly waiting for it. You guys are awesome! :D

  • Smart Doorbell over 5 years ago

    What seems to be the problem?

  • Room temperature sensor with display on Mobile over 5 years ago

    I can do that but the hardware is not connected 24/7.

  • Room temperature sensor with display on Mobile over 5 years ago

    Thanks :)

  • Smart Parking over 5 years ago

    it's all taken care by the Blynk app. Check them out. These people are awesome.
    http://www.blynk.cc/

  • Smart Parking almost 6 years ago

    This is the full schematic. I used an uno and an Ethernet shield on top of it. Sensors are connected as shown. If you are having problems with the app, then I will write a tutorial for it.

Add projectSign up / Login