Ceci N'est Pas Une Ampoule [This Is Not a Lightbulb]

Project showcase by Maddy

  • 3,961 views
  • 1 comment
  • 26 respects

Fiber Optic Homecoming

Project tutorial by Maddy

  • 3,823 views
  • 1 comment
  • 12 respects

TV Tee Shirt

Project showcase by Maddy

  • 27,889 views
  • 6 comments
  • 58 respects

Toolbox 3


Motion Sensing Under Bed Lights

Project tutorial by T3ch Flicks

  • 8,676 views
  • 6 comments
  • 36 respects

PENXZYL 3.0 :: Arduino Brush Plotter :: CNC

Project showcase by Guiye Perez Bongiovanni

  • 12,147 views
  • 9 comments
  • 37 respects

Animated RGB Wall Clock

Project tutorial by TheTNR

  • 17,971 views
  • 11 comments
  • 43 respects

  • Starry Night Prom 4 months ago

    I actually had around 6 leds per pin wired in parallel and never had issues with the board. I think what you have to look out for is the battery, the lights won’t be as bright when you add more, so if you hook up too big of a battery trying to keep the lights bright you’ll fry the board. I used a standard portable phone charger and other than that there wasn’t anything special I had to do to keep from frying the board. I remember having similar concerns and I’m still not sure why there are so many places that say there’s such a small number of leds you can power off of any pin.

  • Starry Night Prom almost 3 years ago

    Thanks for the input, but I actually already have made a fiber optic dress. Check out my post on it https://www.hackster.io/Maddy/fiber-optic-homecoming-0829ea

  • TV Tee Shirt almost 3 years ago

    All components used are technically washable but I air on the side of caution and wear a tank top underneath to avoid washing it.

Add projectSign up / Login