BottiBot

Project showcase by MakerRobotics and Botti

  • 369 views
  • 0 comments
  • 7 respects

Potentiometer with RGB LED

Project showcase by MakerRobotics and matejadjukic03

  • 1,621 views
  • 0 comments
  • 6 respects

Arduino Memory Game

Project showcase by MakerRobotics

  • 3,569 views
  • 1 comment
  • 22 respects


Arduino Morse Code Machine

Project showcase by Vlada Krsmanovic

  • 12,974 views
  • 2 comments
  • 35 respects

Ambient 2 Click Board on Arduino101

by Team MAKERS-NS

  • 1,071 views
  • 5 comments
  • 6 respects

Hack Skateboard for Virtual Reality with Arduino

Project showcase by Matthew Hallberg

  • 5,070 views
  • 2 comments
  • 26 respects

  • Arduino Radar - Version 2.0 over 2 years ago

    First, in arduino control unit (UNO, MEGA ..), Download the program from the Arduino IDE, this program controls the motor and the ultrasonic sensor. This information is sent via the serial port.
    The Preocessing program receives this information and converts it into a graphical representation.
    Two programs run on your computer.
    The code for processing program is located in the code section of this tutorial below the code for the Arduino IDE.
    It's just enough to run the program and copy the code and modify the serial port information in the code.

  • Arduino Radar - Version 2.0 over 2 years ago

    Hi, I made radar display on the monitor (lap top) in the processing program. Project consists of the two programming languages communication Arduino IDE (C/C++) and processing (Java).
    I didn't use an LCD or TFT display, This project uses a laptop - computer for drawing or graphic screen.

  • Arduino Radar - Version 2.0 over 2 years ago

    in part tutorial, which is located at the left side you have to select a Arduino IDE and processing. When you click the processing will write you a complete code for display. In the tutorial has explained all the code so it must be taken from the work of the code. When you remove the check at the port attached to your Arduino and the processing program to modify your port.

Add projectSign up / Login