Project tutorial
Arduino Watering System

Arduino Watering System

Another intresting project to consider is the Arduino Watering System. Everyone has at least one plant in their room, kitchen or balcony. Is

  • 593 views
  • 0 comments
  • 7 respects

Components and supplies

About this project

The soil moisture sensor value goes from 0 to 1023, when the sensor recive a value minor than 600, the relay turn on and the pump starts to irrigating the soil. To adapt the 220V home tension, I used a phone charger. Open it, remove the USB connector, find the VCC and GND pins (probably 1° and 4°) and connect it to the Arduino pins (like the wiring diagram)

Code

CodeArduino
Read the full article on the website: http://makosite.one/watering-system.php
// you can find the complete code on the website: www.makosite.one/watering-system.php

Schematics

Circuit diagram
0242cca4 08f6 4694 b0c4 9a523d10a870 w9uzz69ix3

Comments

Similar projects you might like

Plant watering alarm system with arduino

Project tutorial by Giannis Arvanitakis

  • 12,802 views
  • 3 comments
  • 13 respects

Automatic Plant Watering System with Arduino

Project tutorial by Team RobotGeek Projects Team

  • 58,356 views
  • 4 comments
  • 103 respects

Automatic Watering System

Project tutorial by Manson Hau

  • 21,184 views
  • 11 comments
  • 64 respects

Plant Watering System

Project showcase by Niko123

  • 15,019 views
  • 3 comments
  • 21 respects

Automatic Watering System

Project tutorial by PRosenb

  • 40,596 views
  • 28 comments
  • 98 respects
Add projectSign up / Login