Back

Comments 15

  • Arduino Sunflower over 2 years ago

    the project does not include solar panels, but if you want to add them and view the incoming volts just create a simple volumeter (find various projects on the internet) and then print the values ​​on your LCD

  • Arduino Sunflower almost 3 years ago

    Thank you, I hope that what I have written can help you with your project.
    Bye.
    Rick

  • Arduino Sunflower over 3 years ago

    Hi, this project is fully functional, I have only modified some things, but I can use the circuit diagram and the sketch.

  • Arduino Sunflower over 3 years ago

    Thank you George, now it has been modified!

  • Arduino Sunflower over 3 years ago

    Hello! I apologize for the delay in the reply. First get the necessary components. Assemble them as an electrical scheme and end the code in the Arduino IDE. If it is not clear to you, please reply to this comment or via my email: riccardopesce789@gmail.com

  • Arduino Temperature - Humidity - Rain Sensor almost 4 years ago

    Hi,
    the rain should go only on the high side (gray side). I'm sorry, I do not have a video

  • Arduino Sunflower almost 4 years ago

    To the negative!

  • Arduino Sunflower almost 4 years ago

    Thank you!

  • Arduino Sunflower almost 4 years ago

    Hi!
    I don't understand...This code was written for Arduino, so it works on Arduino IDE.
    What do you mean with: difference in syntax and without functions?

  • Arduino Sunflower almost 4 years ago

    Sure! No problem. I think that it cuold be more simple if we speak with mails. Write me an e-mail and i will explain what do you want to know.
    This is my e-mail: riccardopesce789@gmail.com
    Bye

  • Arduino Sunflower almost 4 years ago

    Hi! Yes, you have to install fritzing, but now I uploaded an image.

  • Arduino Sunflower almost 4 years ago

    In the code there’s only one LDR because the first LDR is on the same line of the second LDR. One pin in common, one at the negative, one at the positive and another one at A0.
    If you need more information send me an email. riccardopesce789@gmail.com
    it will be easier to explain

  • Arduino Sunflower almost 4 years ago

    Thank you Paul! Yes, now i have corrected

  • Arduino Sunflower almost 4 years ago

    Sorry i forgot. There's two LDR inclined by 45 degrees, but the code its correct.

  • Arduino Temperature - Humidity - Rain Sensor almost 4 years ago

    Do you refer to the schematics? Its a 220 ohm resistor. That thing in between humidity sensor and the led its a rain sensor

Add projectSign up / Login