Use your Arduino, IN-12 and IN-15 Nixie tubes and build BIG Binary Nixie Clock or Binary Thermometer & Hygrometer.
Project tutorial by Marcin Saj
Any nixie tubes can be used in this design. The design is based on universal nixie tube sockets.
by Marcin Saj
Easy to use educational shield for Arduino Uno
Use your Arduino board and drive as many nixie tubes you want.
Use your Arduino Nano or Particle Photon board and build a binary Nixie clock with 18 x IN-2 Nixie tubes.
Here you can find datasheet of IN-2 nixie tube: http://www.tube-tester.com/sites/nixie/data/I/IN-2/in-2.htm
and basic schematic: https://github.com/marcinsaj/Nixie-Tube-Sockets/blob/master/schematic/Schematic_Nixie_Tube_Socket_no_07.pdf
You need to connect 170V via 15K resistor to the Anode and GND to any Cathode (0-9 number) you would like to see.
Take a look at the schematic: 74AHC1G125DBV
Or connect with your social account:
New here? Create an account