How to Make the SmartBox V.2

Project tutorial by MisterBotBreak

  • 6,382 views
  • 15 comments
  • 16 respects

How to Make a RC Controller #2

Project tutorial by MisterBotBreak

  • 1,428 views
  • 0 comments
  • 6 respects

How to Make a Hovercraft #2

Project tutorial by MisterBotBreak

  • 2,449 views
  • 0 comments
  • 9 respects


How to Make the SmartBox V.2

Project tutorial by MisterBotBreak

  • 6,382 views
  • 15 comments
  • 16 respects

How to Make a Hovercraft #2

Project tutorial by MisterBotBreak

  • 2,449 views
  • 0 comments
  • 9 respects

How to Make a RC Controller #2

Project tutorial by MisterBotBreak

  • 1,428 views
  • 0 comments
  • 6 respects

  • How to Make the SmartBox V.2 6 months ago

    Hi,
    They're no threadings in the case, I just screwed M.3 screws without anything else : it keeps the shell in place.
    (to be honest I'm not an expert in screwing, if you have any tips for me don't hesitate to tell me :D)
    The gas sensor I use is the MQ-2.
    The RTC module isn't mounted on a structure : it floats in the box.

  • How to Make the SmartBox V.2 6 months ago

    Hi,
    I used M.3x30 screws.

  • How to Use a TFT Screen 6 months ago

    Hi,
    Do you know how to properly include a library to arduino IDE ?
    If not, check this out : https://youtu.be/WuqEAUirXw0

    Once installed, you should be able to use the TFT screen.

Add projectSign up / Login