Public projects 3

Pocket Metal Locator

Project tutorial by NZDoug

  • 2,350 views
  • 5 comments
  • 22 respects

Retro Arcade Clock

Project tutorial by NZDoug

  • 4,376 views
  • 5 comments
  • 52 respects

Portable Biometric Lockable Case

Project tutorial by NZDoug

  • 2,872 views
  • 0 comments
  • 17 respects

Toolbox 3


Replicated projects 0

 NZDoug hasn't replicated any projects yet.

Petoi Nybble

Project showcase by Rongzhong Li (李荣仲)

  • 15,016 views
  • 28 comments
  • 223 respects

Add WiFi to Arduino UNO

by Jefferson Paredes

  • 131,997 views
  • 56 comments
  • 86 respects

Head Swinging Dragonfly

Project tutorial by HomeMadeGarbage

  • 2,665 views
  • 4 comments
  • 29 respects

Comments 3

  • Retro Arcade Clock 19 days ago

    Hi there is a link above to a Youtube Video covering the operation of each of the options.
    https://www.youtube.com/watch?v=e5DrPF1A_Pg

  • Pocket Metal Locator 26 days ago

    Hey yes I did. I used a small amount however will keep an eye on it. Thanks.

  • Retro Arcade Clock about 1 month ago

    Hi,

    1. The Mega board was chosen because of the high-intensity IO (parallel interface) and Memory requirements required for the graphics. Some serial interface based screens with the same resolution will work with the drivers (see the library notes) however the performance is too slow.
    2. The screen graphics have been specifically designed for the resolution of the screen 240x320. I had to map out the screen and hard code the graphics. I've never tried on a smaller screen with the same resolution, however, this could work if the graphics driver was supported. You could check in the release notes and try it. Let me know how you get on!!
Add projectSign up / Login