Project uses an Arduino Uno computer and an 18 volt battery pack to efficiently power a 10 foot kayak electrically.
Project tutorial by Netcamprojects
Code your favorite music and play it on a Casio keyboard or on one of the two xylophones described in the project.
Hi Oldblue2, Thanks for the excellent question, as you can see I added instructions to the power wiring section to explain how to by-pass the control switch and the resistors. There is no need to remove the resistors nor to modify the motor. All we do is to cut the red and black wires going to the motor and butt connect about 18 inches of wire so that they will reach the terminals on the mini-transom. The cut wires to the control switch and the white and yellow wires can be left in place. Four butt connectors will restore the wiring to its original configuration.
Or connect with your social account:
New here? Create an account