Control an LED with the Remote Control

1#include <IRremote.h>
2
3
4const int receiver = 11; 
5const int   led = 9;
6
7IRrecv ir_receiver(receiver);           
8decode_results results;           
9
10void setup()   
11{
12  Serial.begin(9600);
13  ir_receiver.enableIRIn();   
14  pinMode(led, OUTPUT);  
15}
16
17
18void loop() 
19{
20  if (ir_receiver.decode(&results))
21
22   {
23    Serial.println(results.value, HEX);
24    translateIR(); 
25    ir_receiver.resume();   
26    delay(200); 
27  } 
28  
29}
30
31void translateIR() 
32
33{
34   int sensorValue=0;
35  sensorValue = digitalRead(led);
36  
37  switch(results.value){
38
39   case 0x20DF10EF:
40    if (sensorValue==0){
41      
42      Serial.println("   ON "); 
43      digitalWrite(led, HIGH); 
44      break;
45    }
46    if (sensorValue==1){
47       
48      Serial.println(" OFF "); 
49      digitalWrite(led, LOW); 
50       break;
51    }
52    
53    case 0x20DFD02F:
54    if (sensorValue==0){
55       Serial.println(" BLINK ");
56      for(int i=1;i<5;i++){
57      digitalWrite(led,   HIGH);
58      delay(500);
59      digitalWrite(led, LOW);
60      delay(500);
61       }
62      break;
63  }
64  default: 
65    Serial.println(" other button    ");
66  }
67}

1#include <IRremote.h>
2
3const int receiver=11;
4
5IRrecv ir_receiver(receiver);
6decode_results  results;
7
8void setup() {
9 Serial.begin(9600);
10 ir_receiver.enableIRIn();
11}
12
13void  dump(const decode_results* results) {
14  const int protocol=results->decode_type;
15  Serial.print("Protocol: ");
16  if (protocol==UNKNOWN){
17    Serial.println("not  recognized.");
18    } 
19    else{
20      if(protocol==NEC){
21        Serial.println("NEC");
22        }
23      else if(protocol==SONY){
24        Serial.println("SONY");
25        }
26      else if(protocol==RC5){
27        Serial.println("RC5");
28        } else if(protocol==RC6){
29            Serial.println("RC6");
30            }
31Serial.print("Value:  ");
32Serial.print(results->value, HEX);
33Serial.print("(");
34Serial.print(results->bits,  DEC);
35Serial.print(" bits)");
36}
37}
38
39void loop() {
40 if(ir_receiver.decode(&results))  {
41   dump(&results);
42   ir_receiver.resume();
43   }
44}

1#include <IRremote.h>
2
3
4const int receiver = 11; 
5const int  led = 9;
6
7IRrecv ir_receiver(receiver);           
8decode_results results;          
9
10void setup()   
11{
12  Serial.begin(9600);
13  ir_receiver.enableIRIn();  
14  pinMode(led, OUTPUT);  
15}
16
17
18void loop() 
19{
20  if (ir_receiver.decode(&results))
21
22  {
23    Serial.println(results.value, HEX);
24    translateIR(); 
25    ir_receiver.resume();  
26    delay(200); 
27  } 
28  
29}
30
31void translateIR() 
32
33{
34  int sensorValue=0;
35  sensorValue = digitalRead(led);
36  
37  switch(results.value){
38
39  case 0x20DF10EF:
40    if (sensorValue==0){
41      
42      Serial.println("  ON "); 
43      digitalWrite(led, HIGH); 
44      break;
45    }
46    if (sensorValue==1){
47      
48      Serial.println(" OFF "); 
49      digitalWrite(led, LOW); 
50      break;
51    }
52    
53    case 0x20DFD02F:
54    if (sensorValue==0){
55      Serial.println(" BLINK ");
56      for(int i=1;i<5;i++){
57      digitalWrite(led,  HIGH);
58      delay(500);
59      digitalWrite(led, LOW);
60      delay(500);
61      }
62      break;
63  }
64  default: 
65    Serial.println(" other button   ");
66  }
67}