Turn on/off your fan without getting up, just by using an IR remote.
Project tutorial by Gabriele Scordamaglia and Antonio Di Bella
A very huge LED clock made with an LED strip, an RTC module and other parts you will find in the project. Very, ver nice to see, believe me!
Project tutorial by Gabriele Scordamaglia
This is the first version of my Arduino Weather Station, a very simple project that will give you weather information.
è un automazione di un braccio pneumatico in grado di smistare il legno da ferro
How to build and configure a control unit based on Arduino for opening, closing and other actions for a motorized sliding door.
Project tutorial by DVDMDN
Smart home system using MediaTek Linkit, Xbee, Arduino, Orange PI and Azure
Project tutorial by Syed Sanoor
I weren't disappointed, just wanted to make sure there were no misunderstandings.
Again, have a nice day!
I just posted the schematics and code parts, saying that i was inspired from the original one, quoting it at the start of the story.
That's it (more complete and even better), where you can find anything you want.
Have a nice day. :)
Yeah, i said in the beginning that I WAS INSPIRED by another project, the original one, and i quoted it here and there.
About the advertising: it's true, that's an advertising post (as the title says: BY PCBGOGO), so i can't see the point about pointing that out.
That's a payed project, so just let it go.
About the Fritzing: as I see in other projects (and as i've always done) i put the schematics part done on Fritzing with the breadboard view because i think it's the most "easy-to-read", but, as they say, you never stop learning, so i'll take your advice for good.
I'm very pleased with my final product, and hope everybody who sees this project (or the original one, which is even better) can be pleased with its.
Or connect with your social account:
New here? Create an account