Public projects 2
RGB Backlight + MSGEQ7 Audio Visualizer
Project tutorial by PhilKey
- 39,506 views
- 10 comments
- 41 respects
LED Cube powered with Arduino Nano and controlled by an HC-05 receiving from a Bluetooth App + Custom Animation Creator and Snake Game
RGB LED Cube With Bluetooth App + AnimationCreator
Project showcase by PhilKey
- 9,837 views
- 1 comment
- 33 respects
Toolbox 2
Respected projects 1
This project is for making a 32-band audio (music) frequency spectrum analyzer / visualizer using Arduino.
32-Band Audio Spectrum Visualizer Analyzer
Project showcase by shajeeb
- 167,454 views
- 176 comments
- 311 respects
Comments 1
RGB Backlight + MSGEQ7 Audio Visualizer over 2 years ago
For the MSGEQ7 you simply rebuild the circuit shown on the very bottom ("MSGEQ7 Schematic" in "Schematics") and then connect the middle pin of your audio Jack to GND, the pin on the left via an 10nF capacitor to the Signal In Pin of the MSGEQ7 and the Analog Out pin to A1 (MSGEQ_OUT), Strobe Pin to D2 (STROBE), Reset Pin to D5 (RESET).