Working with a Potentiometer and an LED

Working with a Potentiometer and an LED © GPL3+

Use of a potentiometer to control brightness of an LED.

  • 213 views
  • 0 comments
  • 0 respects

Components and supplies

A000066 iso both
Arduino UNO & Genuino UNO
×1
12002 04
Breadboard (generic)
×1
Bourns 3362p 1 103lf image 160px
Single Turn Potentiometer- 10k ohms
×1
09590 01
LED (generic)
×1
Mfr 25frf52 1k sml
Resistor 1k ohm
×1
11026 02
Jumper wires (generic)
×1

Apps and online services

Ide web
Arduino IDE

About this project

Abstract

  • This project demonstrates working with a potentiometer.

Also visit here.

Objective

  • To control the brightness of a LED using potentiometer.
Working with a Potentiometer

Code

CodeArduino
const int analog_ip = A0;
const int LED = 3;
int inputVal = 0;

void setup() {
  pinMode (LED, OUTPUT);
}

void loop() {
  inputVal = analogRead(analog_ip);
  analogWrite (LED, inputVal/4);
  delay(100);
}

Schematics

Circuit Diagram
Download
Workingwithpotentiometerandled etoscp220i
Schematic Diagram
Download
Workingwithpotentiometerandled pshjuace3w
Breadboard Diagram
Download
Workingwithpotentiometerandled kbdp9mb0rq

Comments

Author

Sbr
SBR
  • 15 projects
  • 13 followers

Published on

May 22, 2019
Share
See similar projects
you might like

Similar projects you might like

Working with Shift Register

This project demonstrates the working with Shift Register.

Working with Shift Register

by SBR

  • 3,561 views
  • 2 comments
  • 8 respects
Bluetooth control led with lcd led status display real time.

Tthis project is going to show you how to make Bluetooth led control with lcd beside the Arduino sowing the new led status.

Bluetooth control led with lcd led status display real time.

Project tutorial by Youssef Sabaa

  • 27,086 views
  • 4 comments
  • 51 respects
Control LED By Clap Using Arduino and Sound Sensor

We're showing how to use KY-038 Sound Sensor using Arduino. You can control LED by clap with the help of Arduino and sound sensor.

Control LED By Clap Using Arduino and Sound Sensor

by IoTBoys

  • 81,682 views
  • 20 comments
  • 45 respects
Ambient Light Sensor Using Photo Resistor and LED Lights!

Uses a photo resistor to determine whether a room is bright, average or dark. It shows this using 3 LEDs and/or the serial monitor.

Ambient Light Sensor Using Photo Resistor and LED Lights!

Project tutorial by DCamino

  • 9,061 views
  • 9 comments
  • 21 respects
LED Blinkies: Arduino Basics

Build a simple LED throwie, then make it smart with an Arduino.

LED Blinkies: Arduino Basics

by Alex Glow

  • 12,206 views
  • 3 comments
  • 25 respects
LED Cube

Arduino based 3D LED Cube (3x3x3) which can produce any light pattern with 27 LEDs.

LED Cube

Project tutorial by Praditha Alwis

  • 9,946 views
  • 0 comments
  • 17 respects
Add projectSign up / Login