Public projects 2

Ultrasonic Map-Maker using an Arduino Yun

Project tutorial by Satyavrat Wagle

  • 53,785 views
  • 37 comments
  • 158 respects

IoT Dune Buggy - Control it from Anywhere!

Project tutorial by Satyavrat Wagle

  • 9,011 views
  • 7 comments
  • 29 respects


Replicated projects 0

 Satyavrat Wagle hasn't replicated any projects yet.

Ultrasonic Map-Maker using an Arduino Yun

Project tutorial by Satyavrat Wagle

  • 53,785 views
  • 37 comments
  • 158 respects

BLE Bot 9000

Project tutorial by 5 developers

  • 24,494 views
  • 7 comments
  • 73 respects

  • Ultrasonic Map-Maker using an Arduino Yun over 1 year ago

    Hello Sarthak, technically, this project can be made using any microcontroller which supports serial communication and PWM outputs. However, this particular writeup can be replicated on any device with the Arduino footprint.

  • Ultrasonic Map-Maker using an Arduino Yun over 1 year ago

    Hello Rahul, apologies for the delay. I hope your doubts were clarified! If not, please feel free to ask!

  • Ultrasonic Map-Maker using an Arduino Yun about 2 years ago

    Thanks a lot, Anthony!
    The breadboard is not really a necessity for the project, I just used the Arduino Breadboard Shield because it has 5 Vcc and 5 Ground Pins. 
    I needed two of each, because I'm powering the servo as well as the sensor from the Arduino, and the board itself provides only one pin for Vcc. Essentially, the Vcc was just shorted to two more pins according to the schematic. You can do the same by a number of different ways, I just chose to go by the breadboard method. I hope this clears your query!

Add projectSign up / Login