Basically a digital clock that can have the time changed at the press of a button.
Project in progress by SharKode
Works on all resin.io supported devices (beagle bone, all rpi etc) and all Arduino boards.
by Craig Mulligan
How to hack a Wii Nunchuk to make it work with Arduino.
Project tutorial by infusion
You can sniff an KNX RF network by an CC1101 radio transceiver.
I sniffed my Siemens Synco Living Home automation system
Project showcase by Team KLS
Hello! Thanks for the feedback! I have added the buttons and the resistors to the list. As for the "clock" you mentioned, I am not using that, or I just do not understand what you mean. The potentiometer is used to adjust the contrast of the LCD screen, however, if you do not want to buy one, you can just use a wire from pin 13, to where the potentiometer would go on the LCD screen, and output approx 335. You could do this by writing this code in setup().
Anyways, I hope I helped you out, or made myself and this project more detailed.
Or connect with your social account:
New here? Create an account