Smallest Arduino in an ATtiny85

Smallest Arduino in an ATtiny85 © GPL3+

Make the smallest Arduino possible with just an ATtiny85 8-pin DIL-IC running in 8MHz from an internal Oscillator.

  • 7,282 views
  • 2 comments
  • 14 respects

Components and supplies

About this project

Overview

In this video tutorial, we continue to shrink the Arduino; this time we use the ATtiny85 to make a small 8-pin Arduino running at 8MHz from the internal clock. This means that NO other hardware is required except a 5V source. We will go through how to download the hardware files needed to get the ATtiny chips into the Arduino IDE. We will then make the Arduino into an Arduino ISP and connect the ATtiny85. We will then finally program the ATtiny using the Arduino IDE and show off our cool blink sketch. This is Anything Arduino episode 3.

Code

Arduino IDE 1.0x support for the ATtiny product range.
Arduino IDE 1.0x support for the ATtiny product range.
Arduino IDE 1.6x support for the ATtiny product range.

Schematics

Arduino Pinout of ATtiny85 / ATtiny45
Where the Arduino pins are located (and which) when running Arduino in an ATtiny85.
Attiny45 85

Comments

Similar projects you might like

Tri-Mode Digital Clock With ATtiny85 And RTC

Project showcase by LAGSILVA

  • 5,207 views
  • 0 comments
  • 19 respects

Programming ATtiny85 with Arduino Uno

Project tutorial by Arjun Ganesan

  • 213,034 views
  • 74 comments
  • 184 respects

Hacking Qualcomm (Quick Charge) QC 2.0/3.0 With ATtiny85

Project tutorial by Shahariar

  • 6,238 views
  • 11 comments
  • 41 respects

Programming the ATtiny85 (Using an Arduino Uno)

Project tutorial by Ian Cumming

  • 2,043 views
  • 1 comment
  • 2 respects

ATtiny85 EMF Detector

Project tutorial by Giovanni Gentile

  • 7,165 views
  • 0 comments
  • 18 respects

nRF24L01+ with ATtiny85 3 Pins

Project tutorial by Arjun Ganesan

  • 52,763 views
  • 40 comments
  • 61 respects
Add projectSign up / Login