MAKE A HUGE LED CYLINDER “ 8 x 4 x 16 “ With Arduino

Project tutorial by TheTNR

  • 3,564 views
  • 3 comments
  • 23 respects

Triple CNC Machine - UPGRADE Version

Project tutorial by TheTNR

  • 8,280 views
  • 3 comments
  • 35 respects

4WD Smart Robot Car

Project tutorial by TheTNR

  • 15,580 views
  • 3 comments
  • 26 respects


Epoxy Resin LED Clock

Project tutorial by TheTNR

  • 2,954 views
  • 2 comments
  • 16 respects

Triple CNC Machine

Project tutorial by TheTNR

  • 37,941 views
  • 44 comments
  • 167 respects

Persistence of Vision (POV) Globe

Project tutorial by TheTNR

  • 11,621 views
  • 7 comments
  • 37 respects

  • MAKE A HUGE LED CYLINDER “ 8 x 4 x 16 “ With Arduino 10 months ago

    Thank you for your good words. Have fun. By the way ,You can check my channel... :)

  • Triple CNC Machine almost 2 years ago

    Hi bro,

    Because we use different a Nema 17 :) anyway I will explain you. On cnc shild must be connections like this Red - Blue - Green - Black.

    Our connection array on this nema 17 like this Blue - Red - Green - Yellow

    so you can check like below;

    Our Must be

    Blue goes to Red
    Yellow goes to Black
    Green goes to Green
    Red goes to Blue

    I hope I explained :( in addition you can find right cables with a using multimeter

  • Persistence of Vision (POV) Globe almost 2 years ago

    Thanks for your good words. I guess about 30 cm

Add projectSign up / Login