Project showcase

Heartbeat Lamp - Mother's Day Gift © GPL3+

Coming MOTHER'S DAY. Do you have any gift idea? If your answer is " NO," do you want to give to her a gift?

  • 204 views
  • 0 comments
  • 0 respects

Components and supplies

Ard nano
Arduino Nano R3
×1
RGB Stribe Led
×1
Mfr 25frf52 10k sml
Resistor 10k ohm
×1
BD135 Transistor
×1
3D Printable Parts
×1
A Glass
×1
Mother's Picture
×1
CNC Laser Draw
×1

Necessary tools and machines

3drag
3D Printer (generic)
09507 01
Soldering iron (generic)
CNC Laser Engraver

About this project

Coming MOTHER'S DAY.

Do you have any gift idea? If your answer is " NO," do you want to give to her a gift?

HEARTBEAT LAMP. As a Izle ve Yap team, we prepared a very nice and special MOTHER'S DAY GIFT. In this video, We want to show you "how to make a heartbeat lamp?" Very simple. We used CNC laser drawing. But if you didnt have CNC laser machine or you can use a picture. You can find the necessary materials on the video for HEARTBEAT LAMP.

Code

Hearbeat.inoArduino
This is arduino code
/*
  Blink
  Turns on an LED on for one second, then off for one second, repeatedly.

  Most Arduinos have an on-board LED you can control. On the Uno and
  Leonardo, it is attached to digital pin 13. If you're unsure what
  pin the on-board LED is connected to on your Arduino model, check
  the documentation at http://www.arduino.cc

  This example code is in the public domain.

  modified 8 May 2014
  by Scott Fitzgerald
 */
byte led=12;

// the setup function runs once when you press reset or power the board
void setup() {
  // initialize digital pin 13 as an output.
  pinMode(led, OUTPUT);
}

// the loop function runs over and over again forever
void loop() {
  digitalWrite(led, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(220);              // wait for a second
  digitalWrite(led, LOW);    // turn the LED off by making the voltage LOW
  delay(220);   
 digitalWrite(led, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(220);
  
  digitalWrite(led, LOW);    // turn the LED off by making the voltage LOW
  delay(500);  
}

Schematics

Electronic Circuit
Circuit mcng2xbqwt

Comments

Similar projects you might like

Binary Clock

Project showcase by pdio

  • 100 views
  • 4 comments
  • 1 respect

Central Heating Boiler Control Box

Project tutorial by Peter Groeneveld

  • 2,632 views
  • 6 comments
  • 17 respects

Arduino - Set Schedule via Web

Project tutorial by phpoc_man

  • 404 views
  • 2 comments
  • 13 respects

Protect Your Room with Fingerprints for Under $20

Project tutorial by Srivishnu Piratla

  • 3,137 views
  • 1 comment
  • 11 respects

Sump Pit Alarm

Project showcase by loupalladino

  • 110 views
  • 0 comments
  • 3 respects

Smart Talking Humanoid Robot Just with Arduino!

Project tutorial by ashraf_minhaj

  • 1,079 views
  • 4 comments
  • 10 respects
Add projectSign up / Login