I want to make a spot welder for battery packs or other stuff that cannot be soldered.
Project in progress by Westpol
I wanted to make a strobe, because why not.
Project tutorial by Westpol
Transfer images over Bluetooth between an Arduino and an Android phone.
Project tutorial by Alf81010
Randomly select a destination for one wagon on a Timesaver layout or randomly select order of wagons for an Inglenook layout.
Project showcase by Leadie69
This project is for making a 32-band audio (music) frequency spectrum analyzer / visualizer using Arduino.
Project showcase by Shajeeb
But just as a warning: I have no idea if the Power is enough to create a strong enough connection and I haven't finished the design. I'm also thinking about a charging circuit that charges the caps automatically after every pulse.
I've looked at the linked project and I'm not sure if this project will work, because I use around 1/5th of the power they used, but I'll just try it out. If it fails, I'll beef it up. I have a very limited buged, sadly, so I would have to wait when it fails.
Nice comment. The strength can only be set by the pulse time in my project. Because of the loss of power after every pulse, I'm already thinkig about a charging circuit wich charges the caps after every pulse.
Or connect with your social account:
New here? Create an account