Back

Comments 17

  • Untitled over 1 year ago

    Yes, you could use both at the same time / same module.

  • Untitled over 1 year ago

    YES

  • Untitled over 1 year ago

    Hi Joshua Newell,
    i appreciate your comment. But if you check the top of the page you will find that copyright of this project is on your name, i'm just posting this project on behalf of someone else. (you)
    Thanks for reaching out.
    Youssef Sabaa

  • Untitled about 2 years ago

    that's wired because i use windows 10 pro and i get 2 COMs only. try each one by one ane reset the arduino ( turn off the power on the module) between each time you try another one.
    and you can go to Bluetooth configuration, COM ports and look for the correct one.

  • Untitled over 2 years ago

    as IK the state pin is just in the HC-06 and unfortunately the HC-06 doesn't work with this project i tried a lot.

  • MKR1000 with Windows 10 over 2 years ago

    check that you did all the steps right.

  • Lcd Display in Real Time. over 2 years ago

    in the serial.

  • Untitled over 2 years ago

    did it work ?

  • Untitled over 2 years ago

    sorry for the late. you don't need to run again the sketch. the sketch is to program the Bluetooth module for the first time only.

  • MKR1000 with Windows 10 over 3 years ago

    hahha no problem. I was sure from that without testing it because I studied the MKR1000 board for the last 1 mouth. (because the MKR1000 was stopped at the airport for illegal transportation product hahahaha). if you have any questions ask.

  • MKR1000 with Windows 10 over 3 years ago

    Elvis Wolcott
    hi, I just sow your comment and wasn't sure but I just tried now and I doesn't respond with the code using wifi.h but it work perfect using the wifi101.h
    I didn't finish this project yet I will finish it today so please see it again and respect it
    thanks in advance.

  • Plant Monitoring System over 3 years ago

    and the source of the programs that you use it please too

  • Plant Monitoring System over 3 years ago

    hey can you help me using the rethinkdb because I can't run it (specially the I didn't finish the first step in the next paragraphe (localhost)
    :
    then open any modern browser and go to localhost:3000

    This will load the RethinkDB dashboard where you can access your database and create tables. For this system, we will need to create a database named plant_monitoring_system and a table named measurements
    •Click Tables to load the tables view
    •Click '+ Add Database' button
    •Type plant_monitoring_system and click Add

    Then, click on 'Data Explorer' to open up the data explorer where we will run our commands to create the table needed for this project. Type the following code inside the Data Explorer and click run.
    •r.db('plant_monitoring_system').tableCreate('measurements')

    That should do it for the database creation. We just need to make sure that the database is running before we start our node app. We started our database earlier with the command

    rethinkdb

    so we should be good to go.

    so can't continued the rest of the project can you send me a demo video for all the steps please fast as possible
    email: uuemad2011@gmail.com
    thanks in advance

  • Bluetooth control led with lcd led status display real time. over 3 years ago

    Hi CheeSeong por
    The led pin is all ready 13 and the lcd pin is 12.

  • Untitled over 3 years ago

    Without it it will not work

  • Untitled over 3 years ago

    Pin 32 will Reset the arduino after uploading the code.
    When you use the cable it is automatically done.

  • Untitled over 3 years ago

    You're welcome anytime please respect

Add projectSign up / Login