Security System | SW-420 | Arduino | GSM

Security System | SW-420 | Arduino | GSM © TAPR-OHL

A security system method that detects vibrations and sends an alert message.

  • 5,959 views
  • 3 comments
  • 9 respects

Components and supplies

Apps and online services

About this project

Howdy. Today I came up with the another security system method that detects vibrations and sends an alert message and can even make calls. Check out the first of my security systems. Alright, let's do this. Before beginning the work, you might need to configure your GSM.

Let's do Wiring

To communicate with the sensor and to trigger the GSM at the right time, we need the do the wiring connections as shown in the schematic below.

Coding time

Alright. It's time to control the body by it's soul. Copy and paste the code in your Arduino IDE. Then compile and upload the code. Make sure you have selected the right port and the board.

Working Prototype

I believe in pictorials rather than words. So, here I show the working prototype in a pictorial.

Thank you

Suggestions, inquires, complaints? Drop mail or comment below.

Code

Github
https://github.com/AbuTaj/Arduino/blob/master/SW-420GSM.ino

Schematics

Arduino-GSM-Sensor Schematic
Schematic eczplnncfp

Comments

Similar projects you might like

Alarm System Security Put to the Test

Project tutorial by danionescu

  • 12,765 views
  • 4 comments
  • 23 respects

Security System And Access Control With Arduino And RFID

Project tutorial by Sarath P

  • 7,251 views
  • 0 comments
  • 18 respects

Ultrasonic Security System

Project tutorial by Ivan

  • 17,286 views
  • 18 comments
  • 50 respects

Arduino Based Security System

Project tutorial by Abishek Bhalaaji

  • 4,458 views
  • 5 comments
  • 18 respects

rfid attendance system using arduino with GSM

Project tutorial by sarful

  • 5,032 views
  • 3 comments
  • 13 respects

Security System With 1Sheeld

Project showcase by nada abdelnaby mady

  • 1,384 views
  • 0 comments
  • 2 respects
Add projectSign up / Login