Architectural model of a bus stop with automatic sunshade according to the position of the sun. It is also sensitive to rain (Version 2.0)
Project tutorial by addicttux
Architectural model of a bus stop with automatic sunshade according to the position of the sun. It is also sensitive to rain.
Project showcase by addicttux
Uses 2 analog joysticks to control 4 servos without of using additional board. Have 3 modes: manual, recording of coordinates and autorun.
Project tutorial by utilstudio
Learn how to simulate throwing a dice with the Arduino and 6 LEDs!
Project showcase by EvdS
With this simple Arduino project, you can servo motor using a remote control.
Project showcase by Electronic Clinic
The links for the 2 videos that are already available, are in the section "ABOUT THIS PROJECT" at the beggining of the this page. I hope to finish the 3rd and final video this weekend.
you are wellcome
For the proof of concept, I used the SG90, as show at the end of the first video. The proof of concept was pretty small. We created a final big model, because that was a requirement form the university.
The huge size of the model, make us use a heavy sunshade, that only move fine with the MG995 servo.
If the rails in wich the sunshade slide, do not offer friction resistance, you can use a smaller servo.
The proof of concept was made with clothes kooks and a half letter size bond paper. Unfortunately I did not take any photographs of the proof of concept.
Or connect with your social account:
New here? Create an account