Public projects 1
Toolbox 4
Respected projects 7
IoT device to remotely monitor pressure (0-150 psi) using cellular data. Get notifications for pressures above/below high/low set-points.
IoT Pressure Sensor: MKR GSM + Arduino Cloud + Google Sheets
Project tutorial by wahltharvey
- 5,133 views
- 6 comments
- 28 respects
Comments 3
IoT Cloud - Getting Started 7 months ago
Dash Button Santa with Arduino MKR1000 7 months ago
So switching to https://github.com/arduino-libraries/ArduinoHttpClient
but cannot manage to make POST/GET calls....
https://github.com/arduino-libraries/ArduinoHttpClient/issues/62Dash Button Santa with Arduino MKR1000 7 months ago
Hi, looks like
WiFiClienthas lost itsconnectSSLmethod. ;-(...
Thanks a lot for this very detailed tutorial which covers all aspects.
By my side, I'm indeed stuck while trying to connect to Arduino cloud, always gettings this :
MQTT Broker: :0
In other words, I can't finalize connection to Arduino IoT platforme. Drivers and firmwares are all OK.
If you have any hint on this, you would be very welcome.
Kind Regards,
Adrien