Project showcase
SMD ATMEGA328P Bootload

SMD ATMEGA328P Bootload © GPL3+

An arduino uno mount bootloader shield for smd ATmega328p

  • 1,134 views
  • 2 comments
  • 7 respects

Components and supplies

About this project

This is a bootloader shield for the arduino uno to be used with ATmega328p smd chip. I just load the virgin smd ATmega328p chip and run the "burn bootloader" on uno. Then solder the bootloaded chip on to the actual project pcb.

Whenever i wanted to use the smd version of ATmega328p, I found it messy and hard to bootload the smd chip. Here I have made a shield with the socket for the smd which can be mounted on the Uno.

I have also provided FTDI to upload a sample code after bootloading the chip to confirm the successful bootload. A test led is connected to a digital pin, which can be programmed to blink and enjoy and confirm the successful bootload.

There is also ICSP pin breakout.

Comments

Similar projects you might like

Arduino Based Mini CNC 2D Plotter

Project showcase by Mrinnovative

  • 75,710 views
  • 13 comments
  • 187 respects

Line Follower Robot

Project showcase by Lomas Subedi

  • 4,132 views
  • 2 comments
  • 9 respects

3D Printed and Expandable Robot for Arduino

Project showcase by Matthew Hallberg

  • 2,340 views
  • 3 comments
  • 10 respects

Line Follower Robot Using Arduino & 1Sheeld

Project tutorial by Ashraf Nabil

  • 2,161 views
  • 0 comments
  • 5 respects

SMD LED Hacked!

Project tutorial by Arnov Sharma

  • 1,461 views
  • 0 comments
  • 6 respects

Ball Tracking Robot

Project showcase by Rohan Juneja

  • 38,443 views
  • 34 comments
  • 86 respects
Add projectSign up / Login