Sonar using arduino and display on processing IDE

I was inspired by obstacle avoidance car's servo's motion, I thought that it's motion could be used as sonar's acutator !

Dec 17, 2020

•

18167 views

•

15 respects

arduino and processing ide

movies radar

Components and supplies

Arduino UNO

Ultrasonic Sensor - HC-SR04 (Generic)

Jumper wires (generic)

SG90 Micro-servo motor

Solderless Breadboard Full Size

Tools and machines

Soldering Iron Kit, SolderPro 150

Hot glue gun (generic)

Apps and platforms

Processing

Arduino IDE

Project description

Code

Sonar code for processing IDE

java

1import processing.serial.*;               
2Serial myPort;                         
3
4String  ang="";
5String distance="";
6String data="";
7
8int angle, dist;
9
10void  setup() {
11   size (2000,800);   
12   myPort = new Serial(this,"COM3", 9600);                     
13   myPort.bufferUntil('.');  
14   background(0);
15}
16
17void  draw() {
18      fill(0,5);              
19      noStroke();
20      rect(0,  0, width, height*0.93); 
21      noStroke();
22      fill(0,255);
23      rect(0,height*0.93,width,height);                   
24      drawRadar(); 
25      drawLine();
26      drawObject();
27      drawText();
28}
29
30
31void serialEvent (Serial myPort) {                                                     
32      data = myPort.readStringUntil('.');
33      data = data.substring(0,data.length()-1);
34      int index1 = data.indexOf(",");                                                    
35      ang= data.substring(0, index1);                                                 
36      distance= data.substring(index1+1, data.length());                            
37      angle = int(ang);
38      dist = int(distance);
39      System.out.println(angle);
40}
41
42void  drawRadar(){
43    pushMatrix();
44    noFill();
45    strokeWeight(0.5);
46    stroke(10,255,10);            
47    translate(width/2,height-height*0.06);    
48    line(-width/2,0,width/2,0);    
49    arc(0,0,(width*0.5),(width*0.5),PI,TWO_PI);
50    arc(0,0,(width*0.25),(width*0.25),PI,TWO_PI);
51    arc(0,0,(width*0.75),(width*0.75),PI,TWO_PI);
52    arc(0,0,(width*0.95),(width*0.95),PI,TWO_PI);
53    line(0,0,(-width/2)*cos(radians(30)),(-width/2)*sin(radians(30)));
54    line(0,0,(-width/2)*cos(radians(60)),(-width/2)*sin(radians(60)));
55    line(0,0,(-width/2)*cos(radians(90)),(-width/2)*sin(radians(90)));
56    line(0,0,(-width/2)*cos(radians(120)),(-width/2)*sin(radians(120)));
57    line(0,0,(-width/2)*cos(radians(150)),(-width/2)*sin(radians(150)));
58    stroke(175,255,175); 
59    line(0,0,(-width/2)*cos(radians(15)),(-width/2)*sin(radians(15)));
60    line(0,0,(-width/2)*cos(radians(45)),(-width/2)*sin(radians(45)));
61    line(0,0,(-width/2)*cos(radians(75)),(-width/2)*sin(radians(75)));
62    line(0,0,(-width/2)*cos(radians(105)),(-width/2)*sin(radians(105)));
63    line(0,0,(-width/2)*cos(radians(135)),(-width/2)*sin(radians(135)));
64    line(0,0,(-width/2)*cos(radians(165)),(-width/2)*sin(radians(165)));
65    popMatrix();
66}
67
68void  drawLine() {
69  pushMatrix();
70  strokeWeight(9);
71  stroke(0,255,0);
72  translate(width/2,height-height*0.06); 
73  line(0,0,(width/2)*cos(radians(angle)),(-width/2)*sin(radians(angle)));
74  popMatrix();
75}
76
77void drawObject() {
78    pushMatrix();    
79    strokeWeight(9);
80    stroke(255,0,0);
81    translate(width/2,height-height*0.06);
82    float  pixleDist = (dist/40.0)*(width/2.0);                       
83    float pd=(width/2)-pixleDist;
84    float x=-pixleDist*cos(radians(angle));
85    float y=-pixleDist*sin(radians(angle));
86    if(dist<=40){                               
87       line(-x,y,-x+(pd*cos(radians(angle))),y-(pd*sin(radians(angle))));
88    }
89    popMatrix();
90}
91
92void drawText(){
93    pushMatrix();
94    fill(100,200,255);
95    textSize(25);
96    text("10cm",(width/2)+(width*0.115),height*0.93);
97    text("20cm",(width/2)+(width*0.24),height*0.93);
98    text("30cm",(width/2)+(width*0.365),height*0.93);
99    text("40cm",(width/2)+(width*0.45),height*0.93);
100    if(dist<=40) {
101      text("Distance :"+dist,width*0.7,height*0.99);
102    }
103    translate(width/2,height-height*0.06);
104    textSize(25);
105    text(" 30",(width/2)*cos(radians(30)),(-width/2)*sin(radians(30)));
106    text(" 60",(width/2)*cos(radians(60)),(-width/2)*sin(radians(60)));
107    text("90",(width/2)*cos(radians(91)),(-width/2)*sin(radians(90)));
108    text("120",(width/2)*cos(radians(123)),(-width/2)*sin(radians(118)));
109    text("150",(width/2)*cos(radians(160)),(-width/2)*sin(radians(150)));
110    popMatrix();  
111}
112

import processing.serial.*;               
Serial myPort;                         

String  ang="";
String distance="";
String data="";

int angle, dist;

void  setup() {
   size (2000,800);   
   myPort = new Serial(this,"COM3", 9600);                     
   myPort.bufferUntil('.');  
   background(0);
}

void  draw() {
      fill(0,5);              
      noStroke();
      rect(0,  0, width, height*0.93); 
      noStroke();
      fill(0,255);
      rect(0,height*0.93,width,height);                   
      drawRadar(); 
      drawLine();
      drawObject();
      drawText();
}


void serialEvent (Serial myPort) {                                                     
      data = myPort.readStringUntil('.');
      data = data.substring(0,data.length()-1);
      int index1 = data.indexOf(",");                                                    
      ang= data.substring(0, index1);                                                 
      distance= data.substring(index1+1, data.length());                            
      angle = int(ang);
      dist = int(distance);
      System.out.println(angle);
}

void  drawRadar(){
    pushMatrix();
    noFill();
    strokeWeight(0.5);
    stroke(10,255,10);            
    translate(width/2,height-height*0.06);    
    line(-width/2,0,width/2,0);    
    arc(0,0,(width*0.5),(width*0.5),PI,TWO_PI);
    arc(0,0,(width*0.25),(width*0.25),PI,TWO_PI);
    arc(0,0,(width*0.75),(width*0.75),PI,TWO_PI);
    arc(0,0,(width*0.95),(width*0.95),PI,TWO_PI);
    line(0,0,(-width/2)*cos(radians(30)),(-width/2)*sin(radians(30)));
    line(0,0,(-width/2)*cos(radians(60)),(-width/2)*sin(radians(60)));
    line(0,0,(-width/2)*cos(radians(90)),(-width/2)*sin(radians(90)));
    line(0,0,(-width/2)*cos(radians(120)),(-width/2)*sin(radians(120)));
    line(0,0,(-width/2)*cos(radians(150)),(-width/2)*sin(radians(150)));
    stroke(175,255,175); 
    line(0,0,(-width/2)*cos(radians(15)),(-width/2)*sin(radians(15)));
    line(0,0,(-width/2)*cos(radians(45)),(-width/2)*sin(radians(45)));
    line(0,0,(-width/2)*cos(radians(75)),(-width/2)*sin(radians(75)));
    line(0,0,(-width/2)*cos(radians(105)),(-width/2)*sin(radians(105)));
    line(0,0,(-width/2)*cos(radians(135)),(-width/2)*sin(radians(135)));
    line(0,0,(-width/2)*cos(radians(165)),(-width/2)*sin(radians(165)));
    popMatrix();
}

void  drawLine() {
  pushMatrix();
  strokeWeight(9);
  stroke(0,255,0);
  translate(width/2,height-height*0.06); 
  line(0,0,(width/2)*cos(radians(angle)),(-width/2)*sin(radians(angle)));
  popMatrix();
}

void drawObject() {
    pushMatrix();    
    strokeWeight(9);
    stroke(255,0,0);
    translate(width/2,height-height*0.06);
    float  pixleDist = (dist/40.0)*(width/2.0);                       
    float pd=(width/2)-pixleDist;
    float x=-pixleDist*cos(radians(angle));
    float y=-pixleDist*sin(radians(angle));
    if(dist<=40){                               
       line(-x,y,-x+(pd*cos(radians(angle))),y-(pd*sin(radians(angle))));
    }
    popMatrix();
}

void drawText(){
    pushMatrix();
    fill(100,200,255);
    textSize(25);
    text("10cm",(width/2)+(width*0.115),height*0.93);
    text("20cm",(width/2)+(width*0.24),height*0.93);
    text("30cm",(width/2)+(width*0.365),height*0.93);
    text("40cm",(width/2)+(width*0.45),height*0.93);
    if(dist<=40) {
      text("Distance :"+dist,width*0.7,height*0.99);
    }
    translate(width/2,height-height*0.06);
    textSize(25);
    text(" 30",(width/2)*cos(radians(30)),(-width/2)*sin(radians(30)));
    text(" 60",(width/2)*cos(radians(60)),(-width/2)*sin(radians(60)));
    text("90",(width/2)*cos(radians(91)),(-width/2)*sin(radians(90)));
    text("120",(width/2)*cos(radians(123)),(-width/2)*sin(radians(118)));
    text("150",(width/2)*cos(radians(160)),(-width/2)*sin(radians(150)));
    popMatrix();  
}

Sonar code for arduino IDE

c_cpp

1#include <Servo.h>
2const int trigPin=12;
3const int echoPin=11;
4long  duration;
5int distance;
6Servo s1;
7
8void setup() {
9  Serial.begin(9600);
10  pinMode(trigPin,OUTPUT);
11  pinMode(echoPin,INPUT);
12  s1.attach(9);
13}
14
15void  loop(){
16    for(int i=0;i<180;i=i+1){            
17        s1.write(i);
18        delay(30);
19        distance = calDist();
20        Serial.print(i);                      
21        Serial.print(",");                   
22        Serial.print(distance);              
23        Serial.print(".");                   
24     }
25    for(int i=180;i>0;i=i-1){  
26        s1.write(i);
27        delay(30);
28        distance = calDist();
29        Serial.print(i);
30        Serial.print(",");
31        Serial.print(distance);
32        Serial.print(".");
33    }
34}
35
36    int calDist(){
37       digitalWrite(trigPin, LOW);
38       delayMicroseconds(2);
39       digitalWrite(trigPin, HIGH);
40       delayMicroseconds(10);
41       digitalWrite(trigPin,  LOW);                                                     
42       duration =  pulseIn(echoPin, HIGH);                            
43       distance= duration*0.034/2;                  
44       return distance;
45}
46

#include <Servo.h>
const int trigPin=12;
const int echoPin=11;
long  duration;
int distance;
Servo s1;

void setup() {
  Serial.begin(9600);
  pinMode(trigPin,OUTPUT);
  pinMode(echoPin,INPUT);
  s1.attach(9);
}

void  loop(){
    for(int i=0;i<180;i=i+1){            
        s1.write(i);
        delay(30);
        distance = calDist();
        Serial.print(i);                      
        Serial.print(",");                   
        Serial.print(distance);              
        Serial.print(".");                   
     }
    for(int i=180;i>0;i=i-1){  
        s1.write(i);
        delay(30);
        distance = calDist();
        Serial.print(i);
        Serial.print(",");
        Serial.print(distance);
        Serial.print(".");
    }
}

    int calDist(){
       digitalWrite(trigPin, LOW);
       delayMicroseconds(2);
       digitalWrite(trigPin, HIGH);
       delayMicroseconds(10);
       digitalWrite(trigPin,  LOW);                                                     
       duration =  pulseIn(echoPin, HIGH);                            
       distance= duration*0.034/2;                  
       return distance;
}

Sonar code for arduino IDE

c_cpp

1#include <Servo.h>
2const int trigPin=12;
3const int echoPin=11;
4long   duration;
5int distance;
6Servo s1;
7
8void setup() {
9  Serial.begin(9600);
10   pinMode(trigPin,OUTPUT);
11  pinMode(echoPin,INPUT);
12  s1.attach(9);
13}
14
15void   loop(){
16    for(int i=0;i<180;i=i+1){            
17        s1.write(i);
18         delay(30);
19        distance = calDist();
20        Serial.print(i);                       
21        Serial.print(",");                   
22        Serial.print(distance);               
23        Serial.print(".");                   
24     }
25     for(int i=180;i>0;i=i-1){  
26        s1.write(i);
27        delay(30);
28         distance = calDist();
29        Serial.print(i);
30        Serial.print(",");
31         Serial.print(distance);
32        Serial.print(".");
33    }
34}
35
36     int calDist(){
37       digitalWrite(trigPin, LOW);
38       delayMicroseconds(2);
39        digitalWrite(trigPin, HIGH);
40       delayMicroseconds(10);
41       digitalWrite(trigPin,   LOW);                                                     
42       duration =   pulseIn(echoPin, HIGH);                            
43       distance= duration*0.034/2;                   
44       return distance;
45}
46

#include <Servo.h>
const int trigPin=12;
const int echoPin=11;
long   duration;
int distance;
Servo s1;

void setup() {
  Serial.begin(9600);
   pinMode(trigPin,OUTPUT);
  pinMode(echoPin,INPUT);
  s1.attach(9);
}

void   loop(){
    for(int i=0;i<180;i=i+1){            
        s1.write(i);
         delay(30);
        distance = calDist();
        Serial.print(i);                       
        Serial.print(",");                   
        Serial.print(distance);               
        Serial.print(".");                   
     }
     for(int i=180;i>0;i=i-1){  
        s1.write(i);
        delay(30);
         distance = calDist();
        Serial.print(i);
        Serial.print(",");
         Serial.print(distance);
        Serial.print(".");
    }
}

     int calDist(){
       digitalWrite(trigPin, LOW);
       delayMicroseconds(2);
        digitalWrite(trigPin, HIGH);
       delayMicroseconds(10);
       digitalWrite(trigPin,   LOW);                                                     
       duration =   pulseIn(echoPin, HIGH);                            
       distance= duration*0.034/2;                   
       return distance;
}

Downloadable files

Scheamatics for sonar

Comments

Only logged in users can leave comments

akk47

0 Followers

•

0 Projects

Intro