First look at the Arduino MKR WiFi 1010.
by Andrea Richetta and russelljtdyer
Use your MKR FOX 1200 as a movement trigger to keep an eye on your belongings.
Project tutorial by Arduino_Genuino and Andrea Richetta
Cannot connect to your favourite https site with your MKR1000?
Follow this guide to install SSL certificate in a easy way using the GUI.
by Andrea Richetta
This is a simple Intel Curie BLE discovery example. We will scan for Tile device. Based on RSSI we will change the color on WS2811 LEDs.
Project tutorial by Nenad Cetic
A project using the AmazonDRS library for WiFi101 connected Arduinos. Just like the AWS IoT button, but completely open source!
Project tutorial by Brian Carbonette
DIY Amazon Echo using Arduino that can control house lights, tell you the time, play music and even get the weather status right now.
Project tutorial by ahmed ismail
Hi, it works
You need to replace "given_URL" with the URL generated by Zapier.
the complete string to test in the browser should be like "https://hooks.zapier.com/hooks/catch/BLABLA/BLABLA?temperature=34&moisture=16&light=5&warning=1 "
be sure to remove the trailing slash "/" from the url generated by Zapier.
Hi Eric, with the new IDE 1.6.10 the certificate uploader (and the firmware updater) is direct inside the IDE without the need to launch any external executable.
check this out https://www.arduino.cc/en/Tutorial/FirmwareUpdater
Or connect with your social account:
New here? Create an account