World’s First Wall Engraving/Milling CNC Machine that works on the vertical surface without any X-Axis Limits.
Project tutorial by Arnab Kumar Das
It is an Arduino, Customised GRBL, CoreXY, Servo and Stepper based CNC Drawbot that is Open Source and Open Hardware. It can draw or .......
both should be made parallel and connected to single power source. you can make them parallel externally also
Thank You .. I have uploaded the templates. the problem can also be in the stepper motor pulse settings in GRBL. So check that too.
This was the only solution to mount the bushings ...
Or connect with your social account:
New here? Create an account