Public projects 10

See all of Atlas Scientific's public projects
DIY Benchtop pH Meter

How to make a benchtop pH meter with an Arduino Uno and the Gravity analog pH sensor from Atlas Scientific.

DIY Benchtop pH Meter

Project tutorial by Atlas Scientific

  • 6,916 views
  • 4 comments
  • 25 respects
Arduino ORP Sensor Calibration

Calibrating Atlas Scientific's EZO ORP (oxidation-reduction potential) sensor using Arduino Uno.

Arduino ORP Sensor Calibration

by Atlas Scientific

  • 921 views
  • 0 comments
  • 3 respects
Arduino Salinity Sensor Calibration

Calibrating Atlas Scientific's EZO salinity/conductivity K1.0 sensor using Arduino Uno.

Arduino Salinity Sensor Calibration

by Atlas Scientific

  • 1,002 views
  • 0 comments
  • 3 respects

Toolbox 9

See all of Atlas Scientific's tools
Ardgen 101
Explore the endless capabilities of physical computing. Arduino 101: with on-board motion sensors and Bluetooth LE radio.

Arduino 101 & Genuino 101

Qhxvtrcdgg3cd0xuwzsl
An Arduino Uno incorporating a WizNet W5100 TCP/IP Ethernet Controller.

Arduino Ethernet Rev. 3

Ide web
The open-source Arduino Software (IDE) makes it easy to write code and upload it to the board. It runs on Windows, Mac OS X, and Linux.

Arduino IDE

Respected projects 8

See all of Atlas Scientific's respected projects
DIY Benchtop pH Meter

How to make a benchtop pH meter with an Arduino Uno and the Gravity analog pH sensor from Atlas Scientific.

DIY Benchtop pH Meter

Project tutorial by Atlas Scientific

  • 6,916 views
  • 4 comments
  • 25 respects
Arduino pH Sensor Calibration

Calibrating Atlas Scientific's EZO pH sensor using Arduino Uno.

Arduino pH Sensor Calibration

by Atlas Scientific

  • 10,551 views
  • 12 comments
  • 8 respects
Arduino Dissolved Oxygen Sensor Calibration

Calibrating Atlas Scientifc's EZO D.O sensor using Arduino Uno.

Arduino Dissolved Oxygen Sensor Calibration

by Atlas Scientific

  • 4,382 views
  • 0 comments
  • 7 respects

Comments 8

See all of Atlas Scientific's comments
  • Arduino pH Sensor Calibration 2 months ago

    Once the calibration has been completed, you can use the sensor (pH probe and EZO pH circuit) in your application.

  • DIY Benchtop pH Meter 5 months ago

    If the probe is being used in applications such as hydroponics, fish tanks or any environment that generally has levels of weak acid/base then calibrating once per year would suffice.
    Currently, the calibration is done via the Arduino serial monitor. Adding buttons for this would be a neat modification!

  • DIY Benchtop pH Meter 5 months ago

    Thanks for the tip!

Add projectSign up / Login