Back

Comments 11

  • Arduino pH Sensor Calibration 5 months ago

    Try the Arduino IDE (https://www.arduino.cc/en/main/software) for this code.

  • Connecting Multiple Sensors to One Arduino Uno Serial Port 10 months ago

    Please send your questions to Support@Atlas-Scientific.com

  • Arduino pH Sensor Calibration 10 months ago

    The sample code provided allows you to interact with the EZO pH board. No modifications are needed. Commands are sent through the Arduino serial monitor. For example, to calibrate the sensor on the low end, enter the command cal,low,4 in the serial monitor.

  • Arduino pH Sensor Calibration about 1 year ago

    Once the calibration has been completed, you can use the sensor (pH probe and EZO pH circuit) in your application.

  • DIY Benchtop pH Meter over 1 year ago

    If the probe is being used in applications such as hydroponics, fish tanks or any environment that generally has levels of weak acid/base then calibrating once per year would suffice.
    Currently, the calibration is done via the Arduino serial monitor. Adding buttons for this would be a neat modification!

  • DIY Benchtop pH Meter over 1 year ago

    Thanks for the tip!

  • Arduino pH Sensor Calibration over 1 year ago

    Thanks!
    The board does all the processing and outputs in real-time, the pH of the sample.

  • DIY Aquarium Evaporation Top Off System over 1 year ago

    The motor in the pump has its own 12V power supply. Only the controller (attached to the back of the pump) is connected to the Arduino. The operating voltage of the controller is 3.3V – 5V.

  • DIY Aquarium Evaporation Top Off System over 1 year ago

    Thanks for the feedback appreciate it!
    This is a very basic application of the peristaltic pump. Definitely, more components such as level sensors and solenoids can be added to improve the system.

  • Connecting Multiple Sensors to One Arduino Uno Serial Port over 1 year ago

    Thanks for the feedback.
    When we created these libraries and accompanying examples, we tried to balance ease of use and performance. In this case, we felt that the Arduino built-in string library and its parsing capabilities simplified our code (both easier modification and readability, as well as familiarity). So some dynamic memory allocation in a non-critical section was a worthwhile tradeoff.

  • DIY pH Dosing Pump over 1 year ago

    Thanks! pH dosing pumps are extremely useful in applications such as hydroponics, aquaponics, fish tanks and even lab experiments.

Add projectSign up / Login