BrewBench - Is an Arduino home brewing kettle temperature monitor, controller and notification system. It can work as a RIMS system.
Project tutorial by BrewBench
Monitor a battery bank and environmental conditions; send notification if water is detected or batteries are unexpectedly low.
Project in progress by damonlane
Senso is a device that detects deforestation using sound analysis detecting machines used to cut down trees and warning the authorities.
Project tutorial by Andrei Florian
Yes, it's overkill, but if walking up motion-activated light-up stairs is wrong, well then I don't want to be right.
Project tutorial by Dante Roumega
yea it's on github, easy to host your self.
Yea I have about 75 brews with BrewBench over 3 years.
Thanks yea the outlets get plugged into the house. In the diagram you'll see three prong plug (black, white, green wires) those gets wired to a plug and plugged into the house. The SSR connects to the arduino and then to the plug to turn it on/off. so yes the pump or heater is getting power from the outlet which is plugged into the house. make sense?
Or connect with your social account:
New here? Create an account