Play tic-tac-toe against a robotic arm controlled by an Arduino Mega 2560.
Project in progress by bobn2tech
Directions: Make sure you first create an action group for each position 0-9, 10,11 12, and 100 for each action you want the x-arm to perform. Make sure they work first. If you need action groups, please contact me. After action groups have been downloaded to the X-arm, connect the X-Arm to the Arduino before downloading the Sketch. The x-arm will go into a starting position, then enter "1" on the keyboard to start the game. Place your "X" on the keyboard, then enter the corresponding number on the keypad to confirm position. The computer will respond with its next move. NOTE: If you run the sketch from the PC, then you can monitor the actions and commands. CAUTION: If using the USB connection, disconnect the +5V line from the X-arm to the Arduino board to prevent any damage to either X-arm controller or Arduino board.
Or connect with your social account:
New here? Create an account