Project tutorial
BrewBench

BrewBench © MIT

BrewBench - Is an Arduino home brewing kettle temperature monitor, controller and notification system. It can work as a RIMS system.

  • 16,054 views
  • 57 comments
  • 61 respects

Components and supplies

Ard yun
Arduino Yun
Originally Developed with Yun but also works with Yun2, ESP8266 and ESP32 or any Arduino.
×1
Abx00020 joxdwajpct
Arduino Yun Rev 2
×1
Esp12e
Everything ESP ESP8266 ESP-12E
×1
Adafruit Thermistor
Sensor: Works on analog ports, can be used with a Thermowell below.
×1
DS18B20
Sensor: Works on digital ports with a 4.7K ohm resister
×1
PT100
Sensor: Works on analog ports. You will also need an amplifier, MAX31865 RTD or ZJIA DC 24V RTD PT100 Temperature Sensor Transmitter
×1
Mfr 25frf52 10k sml
Resistor 10k ohm
Only needed if using the Thermistor temp sensor
×1
Mfr 25fbf52 4k75 sml
Resistor 4.75k ohm
Only needed if using the DS18B20 temp sensor
×1
SainSmart 2-Channel Relay Module
Only needed if wiring up a heater or pump for a RIMS system
×1
12002 04
Breadboard (generic)
×1
11026 02
Jumper wires (generic)
×1
20120702130508859
DHT11 Temperature & Humidity Sensor (4 pins)
×1
10167 01
DHT22 Temperature Sensor
×1

Apps and online services

BrewBench Monitor
Web and Mobile site to monitor temps from your LAN
BrewBench Forum
BrewBench community and forum

About this project

BrewBench is an Arduino brew monitor, controller and alert system for the home brewer enthusiast.  It uses the Arduino REST API to interface with thermistors connected to the analog ports.  You can also connect a relay to the digital ports and add a heater / pump to create a RIMS system.  The software will start/stop the heater/pump based on the target temperature you set.

Setup the Arduino

Wire up sensors and relays

Once you have connected the temp sensors to the analog or digital ports, open the web app and enter the Arduino IP address or hostname in settings. Add a sensor and start brewing.

http://monitor.brewbench.co

Code

Github
https://github.com/brewbench

Schematics

Thermistor
Temperature sensor
Temperature thermistor bb
Wiring Diagram
Brewbench wiring diagram pgaewgdcml
Fritzing Wiring Diagram
brewbench-wiring-diagram_LLQb2ug236.fzz
SSR Wiring Diagram
Brewbench wiring diagram ssr apg2tpb4kg
SSR Fritzing Wiring Diagram
brewbench-wiring-diagram-ssr_n5M5jhndSB.fzz

Comments

Team BrewBench

Avantassel
Andrew Van Tassel
  • 1 project
  • 12 followers
Default
Lee Kendrick
  • 1 project
  • 7 followers

Additional contributors

  • Hardware design and fabrication by Lee Kendrick

Published on

January 27, 2016

Members who respect this project

Default12004868 10154468249131258 5409941784743751035 nDefaultAlexDefaultElazafranDefaultDefault

and 55 others

See similar projects
you might like

Similar projects you might like

Portable Arduino Temp/Humidity Sensor with LCD

Project tutorial by ThothLoki

  • 153,300 views
  • 115 comments
  • 185 respects

Habitat Hub: An Alexa and Arduino Smart Home for terrariums.

Project in progress by Garth Frenzel

  • 1,190 views
  • 0 comments
  • 3 respects

Android App-Based Home Automation System Using IOT

Project tutorial by Team Autoshack

  • 24,854 views
  • 17 comments
  • 75 respects

Arduino Temperature Control

Project tutorial by Team pandhoit

  • 18,255 views
  • 10 comments
  • 28 respects

Date, Time, Temperature and Humidity Display

Project tutorial by Chamath Vithanawasam

  • 15,555 views
  • 9 comments
  • 37 respects

Azure Stream Analytics saving lives!

Project tutorial by Asad Zia

  • 6,508 views
  • 3 comments
  • 26 respects
Add projectSign up / Login